Skip to content

VersusNetworking

Cat5e vs Cat6 vs Cat6A vs Cat8: Which Ethernet Cable Does a Gaming PC Need?

Cat5e handles gigabit and was designed to carry 2.5GbE and 5GbE, Cat6 adds 10GbE over shorter runs, Cat6A is the choice for 10GbE up to 100m, and Cat8 is a shielded data-centre cable for 25 and 40Gbps over 30m. For a home gaming PC, a good Cat6 lead is all you need.

By , Editorial team

4 min read

Cat5e vs Cat6 vs Cat6A vs Cat8: Which Ethernet Cable Does a Gaming PC Need?

A wired connection is still the most reliable way to connect a gaming PC, as we explain in our Wi-Fi vs Ethernet vs powerline comparison. But buying the cable has become confusing. Search for an Ethernet lead and you'll find Cat5e, Cat6, Cat6A, Cat7 and Cat8, with the higher numbers often marketed as "gaming" cables.

Forge PC hasn't run its own network tests for this article. The ratings below come from the IEEE's 2.5G/5GBASE-T objectives, the TIA guidance on 10GBASE-T as explained by Fluke Networks, and Fluke Networks' Category 8 fact sheet.

The quick answer

Category

What it's designed to carry

Typical maximum length

Cat5e

Gigabit Ethernet; 2.5GBASE-T and 5GBASE-T were designed to work over it

100m channel

Cat6

Everything Cat5e does; 10GBASE-T over shorter runs

100m for gigabit; 10GBASE-T up to 37m, and 37 to 55m depending on conditions

Cat6A

10GBASE-T over the full distance

100m channel

Cat8

25GBASE-T and 40GBASE-T in data centres; 10Gbps and below at full length

30m channel at 25/40Gbps

All of these use the same RJ45-style plug on a PC network port. Fluke says Category 8 (and the ISO Category 8.1 version) was designed to be backward compatible with RJ45 connectors, although a separate Category 8.2 variant uses connectors that are not.

Cat5e: enough for gigabit and 2.5GbE

Most home PCs and routers have gigabit or 2.5 gigabit Ethernet ports. The IEEE's objectives for the 2.5GBASE-T and 5GBASE-T standard (802.3bz) were to run 2.5Gb/s over up to at least 100m of Cat5e (Class D) cabling, and 5Gb/s over up to 100m of Cat5e or at least 100m of Cat6, in the use cases and installations the standard defines. That's why 2.5GbE has spread so quickly: it works over cabling many homes already have. Our 2.5GbE vs 1GbE explainer covers when the faster port is worth having.

Cat6: the sensible default

Cat6 is the usual choice for new patch leads and is widely available. It handles gigabit and 2.5GbE comfortably. For 10 gigabit Ethernet, the TIA's TSB-155 guidance, quoted by Fluke Networks, says 10GBASE-T should work over Cat6 runs of up to 37m, and between 37m and 55m depending on the alien crosstalk environment (interference from neighbouring cables). Fluke points out that TSB-155 isn't a standard: it's a bulletin for checking, by field testing, whether an existing Cat6 installation can support 10GBASE-T.

Cat6A: what to install for 10 gigabit

If you're running new cable through walls and want 10GBASE-T over a long distance, Fluke says new installations designed to support 10GBASE-T up to 100m should use Category 6A. For a home PC, that only matters if you have a 10 gigabit network card, switch or NAS.

Cat8: built for data centres, not your desk

Fluke's Category 8 fact sheet describes it as cabling developed for 25GBASE-T and 40GBASE-T, the IEEE's data-centre standards. It's always shielded (there's no unshielded version), has a maximum channel length of 30m at 25 and 40Gbps, and is tested up to 2,000MHz, against 500MHz for Category 6A. At 10Gbps and below it can run the full 100m.

None of that makes a Cat8 lead faster for a home PC, because your network card and router are almost certainly running at 1 or 2.5Gbps. A cable can't push data faster than the ports at each end, or your broadband. Fluke also notes that because Cat8 is shielded, careful attention must be paid to shield terminations during installation, which matters more to installers than to someone plugging in a ready-made patch lead.

Will a better cable lower my ping?

Not if your current cable is working properly. Latency in online games depends mostly on your broadband line, your provider's routing and the game server. A damaged or poor-quality cable can cause errors and dropped connections, so replacing a cable that has been crushed or kinked is worthwhile. If you have lag or packet loss, our guide to fixing high ping and packet loss walks through the real causes.

Which should you buy?

Buy Cat6 if: you need a patch lead from your PC to the router, switch or wall socket. It covers gigabit, 2.5GbE and 5GbE, with headroom.

Keep your Cat5e if: it's already installed and working. The IEEE designed 2.5GBASE-T and 5GBASE-T to run over it, so it covers the 1GbE and 2.5GbE ports on most PCs.

Choose Cat6A if: you're wiring a house and want 10 gigabit over long runs in future.

Skip Cat8 unless: you have a specific reason to use it. It isn't harmful, but you won't gain speed on home equipment.

If your PC has no Ethernet port near the router at all, see our guide to adding Wi-Fi to a desktop PC.

Our verdict

For a gaming PC at home, a good Cat6 cable is all you need: it handles gigabit, 2.5GbE and 5GbE, and even 10GbE over short runs according to TIA guidance cited by Fluke Networks. Cat5e is fine if it's already in your walls, Cat6A is the choice for new 10 gigabit installations, and Cat8 is a shielded data-centre cable that won't make your connection faster. Forge PC hasn't tested network cables for this article.

The bottom line

For a gaming PC at home, a good Cat6 cable is all you need: it handles gigabit, 2.5GbE and 5GbE, and even 10GbE over short runs according to TIA guidance cited by Fluke Networks. Cat5e is fine if it's already in your walls, Cat6A is the choice for new 10 gigabit installations, and Cat8 is a shielded data-centre cable that won't make your connection faster. Forge PC hasn't tested network cables for this article.

Sources

  1. 01IEEE 802.3, 2.5G/5GBASE-T (802.3bz) objectives approved March 2015
  2. 02Fluke Networks, 10GBASE-T field testing requirements
  3. 03Fluke Networks, Category 8 cabling fact sheet

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

Best Wi-Fi 7 PCIe Card for Desktop PCs in 2026

Best Picks

Best Wi-Fi 7 PCIe Card for Desktop PCs in 2026

The TP-Link Archer TBE550E is the best Wi-Fi 7 PCIe card for most desktops: it works on AMD systems, supports 320MHz and MLO and was about £85 at Scan (17 Nov 2026), but it's Windows 11 only. The ASUS PCE-BE92BT (about £51) suits recent Intel PCs only. The ASUS PCE-BE6500 (about £34) is the budget pick.

Forge PC Staff4 min

How to Change DNS Servers in Windows 11 (and Turn On DNS over HTTPS)

How-To

How to Change DNS Servers in Windows 11 (and Turn On DNS over HTTPS)

To change DNS in Windows 11, open Settings > Network & internet, pick Ethernet or Wi-Fi, select Edit next to DNS server assignment, switch to Manual and enter addresses such as Cloudflare's 1.1.1.1 and 1.0.0.1, Google's 8.8.8.8 or Quad9's 9.9.9.9. Turn on DNS over HTTPS, check with ipconfig /all, and revert if public Wi-Fi logins fail.

Forge PC Staff3 min

How to Use Ollama From Another PC or Laptop on Your Home Network

How-To

How to Use Ollama From Another PC or Laptop on Your Home Network

Ollama only listens on 127.0.0.1 port 11434 by default. To use it from a laptop or another PC, quit Ollama, set the OLLAMA_HOST environment variable to 0.0.0.0:11434, restart it and point your app at your PC's local IP address. Allow it on private networks only and never forward the port to the internet.

Forge PC Staff2 min

Wi-Fi Keeps Disconnecting in Windows 11? How to Fix It

How-To

Wi-Fi Keeps Disconnecting in Windows 11? How to Fix It

How to stop Wi-Fi disconnecting in Windows 11: run the Network troubleshooter, forget and rejoin the network, restart the router, try the other band, stop Windows turning off the adapter to save power, reset the network stack, reinstall the driver and use network reset as a last resort.

Forge PC Staff4 min