Skip to content

How-ToOS

Wi-Fi Keeps Disconnecting in Windows 11? How to Fix It

How to stop Wi-Fi disconnecting in Windows 11: run the Network troubleshooter, forget and rejoin the network, restart the router, try the other band, stop Windows turning off the adapter to save power, reset the network stack, reinstall the driver and use network reset as a last resort.

By , Editorial team

4 min read

Wi-Fi Keeps Disconnecting in Windows 11? How to Fix It

When a PC keeps losing its Wi-Fi connection, the cause could be the router, the signal, the Wi-Fi adapter's driver or a Windows setting. The trick is to work through the fixes in a sensible order, from the quickest to the most drastic.

Forge PC hasn't tested every Wi-Fi adapter and router. The steps below follow Microsoft's official "Fix Wi-Fi connection issues in Windows" support page, with notes for desktop PCs.

Start with the Network troubleshooter

Microsoft suggests starting with its automated Network troubleshooter, which runs diagnostics and attempts to fix most problems by itself. If it doesn't help, work through the steps below.

1. Check the basics

  • Connection status: select the network icon on the right of the taskbar, make sure Wi-Fi is on, and check your network shows Connected.

  • Airplane mode: go to Settings > Network & internet > Airplane mode and make sure it's off.

2. Forget the network and reconnect

Saved network settings can go wrong, especially after a router change or password change. Go to Settings > Network & internet > Wi-Fi > Manage known networks, select your network and click Forget. Then reconnect by selecting it and entering the password.

3. Restart the modem and router

Microsoft recommends unplugging the router and modem, waiting at least 30 seconds, then plugging the modem back in first and the router after it. If you have a combined modem and router, as many home broadband setups do, you only need to restart that one box. Wait a few minutes for the lights to settle before trying again. Everyone on your Wi-Fi will be disconnected briefly.

4. Try the other frequency band

Many routers broadcast on both 2.4GHz and 5GHz. Microsoft says that if you can see both networks listed separately, try connecting to the other one.

5. Test another device

Try connecting a phone or laptop to the same network in the same spot. If that works reliably, Microsoft says the problem is probably your PC.

6. Stop Windows switching off the Wi-Fi adapter

This one is easy to miss. Windows can turn off a Wi-Fi adapter to save power, which can make connections drop. Microsoft's fix:

  1. Open Device Manager and expand Network adapters.

  2. Right-click your Wi-Fi adapter and choose Properties.

  3. Open the Power Management tab.

  4. Untick Allow the computer to turn off this device to save power.

7. Reset the network stack with commands

Microsoft suggests running these commands, in order, in a Command Prompt opened with Run as administrator:

netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

These reset the TCP/IP stack, release and renew your IP address, and clear the DNS cache.

8. Reinstall the Wi-Fi driver

If the problem started after an update, Microsoft suggests uninstalling the network adapter driver and restarting. First, download the latest Wi-Fi driver from your motherboard or Wi-Fi card maker's website as a backup; if the PC has no internet, download it on another device and copy it over with a USB drive. Then:

  1. Open Device Manager and expand Network adapters.

  2. Right-click the Wi-Fi adapter and select Uninstall device, tick Attempt to remove the driver for this device, then Uninstall.

  3. Restart the PC. Windows will look for and install a driver automatically; if it doesn't, install the backup driver you saved.

9. Check whether it's the router

Microsoft's ping test helps you tell whether the PC can reach the router. Open Command Prompt, type ipconfig, and note the Default gateway address for your Wi-Fi network (often something like 192.168.1.1). Then type ping followed by that address. If you get replies, the connection to the router is working and the problem may be your broadband or provider. If you don't, the issue is between the PC and the router. Microsoft also suggests making sure the router has the latest firmware.

10. Update Windows and restart

Go to Settings > Windows Update > Check for updates, install any updates and restart your PC.

11. Network reset (last resort)

Microsoft says network reset should be the last step you try. It removes and reinstalls all network adapters and returns their settings to default. In Windows 11, go to Settings > Network & internet > Advanced network settings > Network reset, then select Reset now and confirm. Afterwards you may need to reinstall VPN software or reconfigure virtual switches, such as those used by Hyper-V, and your networks may be set to the public profile.

If the signal is simply too weak

If none of this helps and the PC is far from the router, the real fix may be hardware. A desktop with a small antenna on the back of the case often gets a weaker signal than a laptop. See our guides to adding Wi-Fi to a desktop PC, Wi-Fi vs Ethernet vs powerline for gaming and the best Wi-Fi 7 routers. If you're connected but games still lag, see how to fix high ping and packet loss.

Our verdict

When Wi-Fi keeps dropping on a Windows 11 PC, run the Network troubleshooter, then forget and reconnect to the network, restart the router, and try the other frequency band. On desktops, untick "Allow the computer to turn off this device to save power" for the Wi-Fi adapter in Device Manager. If problems continue, reset the network stack, reinstall the driver, and use network reset as the last resort, as Microsoft advises. Forge PC hasn't tested every adapter and router.

The bottom line

When Wi-Fi keeps dropping on a Windows 11 PC, run the Network troubleshooter, then forget and reconnect to the network, restart the router, and try the other frequency band. On desktops, untick "Allow the computer to turn off this device to save power" for the Wi-Fi adapter in Device Manager. If problems continue, reset the network stack, reinstall the driver, and use network reset as the last resort, as Microsoft advises. Forge PC hasn't tested every adapter and router.

Sources

  1. 01Microsoft Support, Fix Wi-Fi connection issues in Windows

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

How-To

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

Microsoft says System Protection isn't on by default. Search for Create a restore point, select your C: drive, choose Configure and turn it on, then create a restore point before installing drivers or tools. To roll back, run rstrui.exe, or use Troubleshoot > Advanced options > System Restore in Windows RE. Personal files aren't affected, but it isn't a backup.

Forge PC Staff3 min

Best Wi-Fi 7 PCIe Card for Desktop PCs in 2026

Best Picks

Best Wi-Fi 7 PCIe Card for Desktop PCs in 2026

The TP-Link Archer TBE550E is the best Wi-Fi 7 PCIe card for most desktops: it works on AMD systems, supports 320MHz and MLO and was about £85 at Scan (17 Nov 2026), but it's Windows 11 only. The ASUS PCE-BE92BT (about £51) suits recent Intel PCs only. The ASUS PCE-BE6500 (about £34) is the budget pick.

Forge PC Staff4 min

How to Use Live Captions and Translation in Windows 11

How-To

How to Use Live Captions and Translation in Windows 11

Press Windows + Ctrl + L to turn on live captions in Windows 11 22H2 or later, download the language files, then dock or float the captions and pick a style. Captions are generated on the device and work offline. On a Copilot+ PC with 24H2 or later, live captions can translate from over 40 languages into English and 27 into Chinese (Simplified).

Forge PC Staff3 min

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

How-To

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

Run ollama ls to list your models, ollama ps to see what's loaded, ollama stop to unload one and ollama rm to delete it. On Windows, models are stored in C:\Users\%username%\.ollama\models; to move them, quit Ollama, set an OLLAMA_MODELS user environment variable to a folder on a bigger drive and restart Ollama.

Forge PC Staff3 min