Skip to content

VersusCPU

Liquid Metal vs Thermal Paste: Is Liquid Metal Worth the Risk for Your CPU?

Thermal paste is the right choice for almost everyone: it's cheap, easy and non-conductive. Liquid metal such as Thermal Grizzly Conductonaut targets maximum heat transfer but is electrically conductive, must never touch aluminium, can react with bare copper and needs insulation and checking. Use it only if you're experienced, ideally on nickel-plated copper or direct-die setups.

By , Editorial team

4 min read

Liquid Metal vs Thermal Paste: Is Liquid Metal Worth the Risk for Your CPU?

Every CPU cooler needs a thermal interface material (TIM) between the processor and the cooler's base to fill microscopic gaps and help heat flow. For almost every build that's a thermal paste. Liquid metal, a gallium-based alloy that's liquid at room temperature, is the enthusiast alternative: it's designed for the best possible heat transfer, but it comes with risks that ordinary paste doesn't.

Forge PC hasn't run its own thermal tests. This comparison is based on Thermal Grizzly's official Conductonaut and Duronaut product pages and FAQs, Arctic's MX-6 page, Indium Corporation's liquid metal user guide, and Tom's Hardware's independent thermal paste testing, as checked on 17 November 2026. For product picks, see our best thermal paste guide.

At a glance

Thermal paste (e.g. Arctic MX-6, Thermal Grizzly Duronaut)

Liquid metal (e.g. Thermal Grizzly Conductonaut)

What it is

A paste of thermally conductive fillers

A liquid alloy of metals such as gallium, indium and tin

Electrically conductive?

No, for the pastes named here

Yes, it can cause short circuits

Safe with aluminium?

Yes

No, gallium attacks aluminium

Best cooler base

Any

Nickel-plated copper

Ease of use

Easy for beginners

Experts only

Maintenance

Replace occasionally when temperatures rise

May need inspection or reapplication, especially on bare copper

Typical use

Almost every desktop build

Delidded CPUs, direct-die cooling, extreme overclocking; some devices, such as the PS5, use it from the factory

Thermal paste: the safe default

Modern pastes are easy to apply and don't conduct electricity. Arctic says its MX-6 is "neither electrically conductive nor capacitive", which it says eliminates the risk of short circuits. Thermal Grizzly lists Duronaut as electrically non-conductive, and Tom's Hardware calls Duronaut "the best performing thermal paste we've tested"; Thermal Grizzly itself points laptop owners without a validated liquid metal setup towards an electrically non-conductive paste such as Duronaut as "the simpler choice".

The downside is that paste isn't the absolute best heat conductor, and some pastes slowly pump out or dry over the years. Replacing it is simple: see how to replace CPU thermal paste.

Liquid metal: faster heat transfer, real risks

Thermal Grizzly describes Conductonaut as a eutectic alloy of metals including tin, gallium and indium with very high thermal conductivity, recommended for "experienced users". Tom's Hardware's best liquid metal, Alphacool's Eisfrost Extreme, scores 5 out of 5 for relative performance in its rankings but just 1 out of 5 for ease of use, and Tom's recommends it for extreme overclocking, listing "difficult to apply" and "electrically conductive" as reasons to avoid it.

The specific risks, from the manufacturers' own documentation:

  • It conducts electricity. Thermal Grizzly says Conductonaut "can cause short circuits" and recommends insulating surrounding components with Kapton tape or a protective coating, using only a very small amount, and never powering on a system if liquid metal has reached the socket or electrical contacts. Indium Corporation recommends some kind of barrier for the same reason.

  • It attacks aluminium. Thermal Grizzly says Conductonaut "must not come into contact with aluminum", and Indium says gallium-based liquid metals are "not compatible with aluminum". Check your cooler's contact surface before you buy, because what matters is the base, not the fins.

  • It reacts with bare copper. On uncoated copper, Thermal Grizzly says reactions and discoloration can occur that hurt performance, and inspection or reapplication may be needed after a few days or weeks. It recommends nickel-plated copper for long-term stability.

  • It can mark your CPU. If liquid metal diffuses into the heat spreader, Thermal Grizzly warns, the engraved information may become illegible and the processor maker's warranty may be at risk.

Thermal Grizzly also stresses that a single thermal conductivity figure isn't a reliable way to compare products; it stopped publishing general W/(m·K) ratings at the end of 2020 because test method, temperature, mounting pressure and contact surfaces all change the result.

Where liquid metal makes sense

Liquid metal is at its best where heat is concentrated in a small area and every degree counts: delidded CPUs and direct-die cooling, extreme overclocking, and devices such as the PS5 that use it from the factory. Thermal Grizzly says Conductonaut can be used to renew an existing liquid metal interface in a PS5, but that this isn't a recommendation to convert other consoles from paste.

For a normal desktop with a tower cooler or AIO, the gains rarely justify the risk. If your CPU runs hot, check the basics first: cooler mounting, fan curves and case airflow. Our guides to stopping a PC overheating and air cooler vs AIO are better first steps.

Our verdict

Thermal paste is the right choice for nearly everyone: it's cheap, easy, non-conductive and works with any cooler. Liquid metal is aimed at maximum heat transfer and Tom's Hardware rates its best liquid metal top for performance, but it's electrically conductive, must never touch aluminium, can react with bare copper and needs careful insulation and checking. Use it only if you're experienced and have a nickel-plated copper cooler, or for direct-die and delidded setups. Forge PC hasn't run its own thermal tests.

The bottom line

Thermal paste is the right choice for nearly everyone: it's cheap, easy, non-conductive and works with any cooler. Liquid metal is aimed at maximum heat transfer and Tom's Hardware rates its best liquid metal top for performance, but it's electrically conductive, must never touch aluminium, can react with bare copper and needs careful insulation and checking. Use it only if you're experienced and have a nickel-plated copper cooler, or for direct-die and delidded setups. Forge PC hasn't run its own thermal tests.

Sources

  1. 01Thermal Grizzly, Conductonaut liquid metal
  2. 02Thermal Grizzly, Duronaut product page
  3. 03ARCTIC, MX-6 product page
  4. 04Indium Corporation, Liquid Metal Paste TIMs Users' Guide
  5. 05Tom's Hardware, Best Thermal Paste for CPUs 2026

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

Two vs Four RAM Sticks for DDR5: Why 2x32GB Usually Beats 4x16GB

Versus

Two vs Four RAM Sticks for DDR5: Why 2x32GB Usually Beats 4x16GB

Two DDR5 sticks are better for most builds. AMD lists DDR5-5600 as the AM5 maximum with two modules but DDR5-3600 with four, and XMP or EXPO speeds above that are overclocking and not guaranteed. Buy 2x16GB or 2x32GB for 32GB or 64GB, and use four sticks, ideally a matched kit, only if you need 128GB or more.

Forge PC Staff3 min

How to Change Your Mouse Polling Rate: 1,000Hz vs 4,000Hz vs 8,000Hz Explained

How-To

How to Change Your Mouse Polling Rate: 1,000Hz vs 4,000Hz vs 8,000Hz Explained

Change your mouse polling rate in the maker's software. 1,000Hz (1ms) is the safe default; 2,000-4,000Hz can feel slightly smoother; 8,000Hz (0.125ms) needs a six-core-plus CPU, a direct USB 3 port and at least 1,600 DPI to saturate. TechPowerUp measured small gains above 4,000Hz, and Razer advises dropping to 4,000Hz or 2,000Hz if you see stutter.

Forge PC Staff4 min

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

Best Picks

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

The best free PC benchmarks in 2026: Cinebench 2026 for CPUs, Unigine Superposition Basic or 3DMark's free Steel Nomad test for graphics cards, CrystalDiskMark for SSDs, Geekbench 7 for cross-platform scores, Geekbench AI for NPUs, Blender Benchmark for creators and OCCT for stability. Run each test twice and download only from official sites.

Forge PC Staff5 min

How to Install a CPU: AM5, LGA 1851 and AM4 Step by Step

How-To

How to Install a CPU: AM5, LGA 1851 and AM4 Step by Step

To install a CPU, unplug the PC and avoid static, release the socket lever and lift the load plate, match the triangle on the processor to the one on the socket, lower it straight in without force, then close the plate and lock the lever. On AM5 and Intel boards the plastic cover pops off; keep it. Check CPU support and update the BIOS first if needed.

Forge PC Staff4 min