AMD's AM4 platform has had a remarkably long life, but if you want a Ryzen 7000, 8000 or 9000 processor you need to move to Socket AM5. That's a bigger job than a drop-in CPU swap, because AM5 also needs a new motherboard and DDR5 memory. This guide explains what changes, what you can reuse and the steps to follow, based on AMD's official platform information and other manufacturers' documentation. Forge PC hasn't tested specific upgrade combinations, so check compatibility lists for your exact parts.
First, decide whether AM5 is worth it
Before spending on three new parts, check whether a better AM4 chip would do the job. AMD has kept AM4 going for a decade and announced a Ryzen 7 5800X3D 10th Anniversary Edition at Computex 2026. Our best AM4 CPU upgrade guide covers the options.
The case for AM5 is longevity. AMD has said it will support Socket AM5 through 2029, which gives you room for a later CPU upgrade on the same board. We looked at what that means in AM5 until 2029: should you wait for Zen 6?.
What you must replace
Part | Why |
|---|
CPU | AM5 uses a different socket from AM4, so AM4 processors won't fit. |
Motherboard | You need an AM5 board with a 600 or 800 series chipset. AMD says all AM5 boards with these chipsets work with all AM5 processors. |
Memory | AMD's AM5 platform uses DDR5. Your DDR4 kit can't be reused. |
On the motherboard, AMD notes that a BIOS update may be required to run Ryzen 8000 and 9000 series processors on 600 series boards (A620, B650, X670 and so on). If you're buying an older board for a newer CPU, check that it's already on a compatible BIOS or supports BIOS Flashback. Our B650 vs B850, A620 vs B840 and best AM5 motherboard guides will help you choose.
For memory, see DDR5 vs DDR4 for gaming and our best DDR5 RAM guide. DDR5 prices have risen a lot this year, so check our UK DDR5 price check before you buy.
What you can usually keep
CPU cooler. AMD says existing AM4 cooling solutions continue to be supported on AM5, and Corsair says AM5 uses the same cooler bracket size as AM4. That means many AM4 coolers should carry over, but check your cooler maker's AM5 compatibility list first, especially if it uses its own backplate or mounting kit.
Graphics card, SSDs and hard drives. These connect through standard PCIe, M.2 and SATA slots, so they carry over. An AM5 board may give you PCIe 5.0 for the graphics card or an NVMe drive, depending on the chipset.
Power supply and case. These don't depend on the socket, as long as the PSU has enough capacity and the right connectors for your parts and the board fits your case.
Windows licence. Usually, yes, but a new motherboard counts as a significant hardware change. See the next section.
Before you start: protect Windows and your data
Back up anything important.
Link your Windows licence to your Microsoft account. Microsoft says replacing the motherboard can stop Windows finding a matching licence, and that a digital licence linked to your Microsoft account can be reactivated with the Activation troubleshooter afterwards. Check this under Settings > System > Activation before you take anything apart.
Note your product key if you activated with one.
Check your BitLocker recovery key if your drive is encrypted. Our guide explains where to find your BitLocker recovery key.
The upgrade, step by step
Remove the old board. Disconnect everything, take out the graphics card, unmount the cooler and remove the AM4 motherboard. Clean the old thermal paste off the cooler; our thermal paste guide shows how.
Prepare the new board outside the case. Fit the AM5 CPU following the board's instructions (our guide to installing a CPU covers it), then install the DDR5 memory in the slots the board's manual recommends for two sticks. See how to install RAM.
Fit the cooler with fresh thermal paste, using the AM5 board's mounting hardware as your cooler's manual describes.
Install the board in the case, then reconnect the PSU cables, front-panel connectors, storage and graphics card.
First boot. If the PC doesn't reach the BIOS straight away, check the motherboard manual and its debug LEDs before assuming a fault. Our guides to reading motherboard debug LEDs and fixing a PC that won't boot can help.
Update the BIOS if needed. Our guide to updating your BIOS safely explains how.
Turn on EXPO to run your memory at its rated speed rather than the default. See how to enable XMP and EXPO.
Boot Windows, install AMD chipset drivers and reactivate if prompted, using Settings > System > Activation > Troubleshoot and choosing "I changed hardware on this device recently".
Our verdict
An AM4 to AM5 upgrade means a new CPU, an AM5 motherboard and DDR5 memory, but your cooler, graphics card, storage, PSU and case can usually stay. The key preparations are linking your Windows licence to your Microsoft account, checking the board's BIOS supports your CPU and confirming your cooler's mounting method. If you'd rather avoid buying DDR5 at current prices, a faster AM4 chip is still a sensible alternative.