Skip to content

How-ToSSD

How to Optimise an SSD in Windows 11: Check TRIM, Run Optimize Drives and Skip the Myths

Windows 11 trims SSDs automatically, weekly by default. Run fsutil behavior query DisableDeleteNotify as administrator: 0 means TRIM is on. Check that scheduled optimisation is on in Defragment and Optimize Drives, and use Optimize or Optimize-Volume -ReTrim to run it by hand. Never defragment an SSD with third-party tools.

By , Editorial team

3 min read

How to Optimise an SSD in Windows 11: Check TRIM, Run Optimize Drives and Skip the Myths

SSDs don't need defragmenting, but they do benefit from TRIM: a command that tells the drive which blocks no longer hold useful data, so it can clean them up in the background. Windows 11 handles this automatically through its Optimize Drives tool. The job for you is simply to make sure it's switched on and running, and to avoid "SSD optimiser" utilities that do more harm than good.

Forge PC hasn't tested anything for this guide. The steps follow Microsoft's support and command documentation, plus Dell's support article, all checked on 17 November 2026.

What "optimise" means for an SSD

Microsoft's support page explains that Windows defragments hard drives, reorganising files so they're easier to read, but SSDs are "trimmed": Windows tells the drive where it can safely do clean-up work when it isn't busy. Both are called optimisation in the tool, which is why the button says Optimize rather than Defragment.

Dell's support article is blunter: don't defragment an SSD. It says defragmenting an SSD isn't recommended and provides no performance benefit, and that Windows sends TRIM commands automatically instead.

Step 1: Check that TRIM is enabled

  1. Right-click Start and open Terminal (Admin) or search for Command Prompt and choose Run as administrator.

  2. Type: fsutil behavior query DisableDeleteNotify

  3. Press Enter.

Microsoft's fsutil documentation explains the setting: delete notifications, "also known as trim or unmap", tell the storage device which clusters have been freed by a file deletion. DisableDeleteNotify = 0 means TRIM is on; 1 means it's off. You'll see separate lines for NTFS and ReFS.

If NTFS shows 1, you can turn TRIM back on with:

fsutil behavior set disabledeletenotify 0

Microsoft notes that some devices may see performance degradation with delete notifications on, which is why the off switch exists, but for a normal NVMe or SATA SSD you want it on.

Step 2: Check scheduled optimisation

  1. Select the search box on the taskbar and type defrag.

  2. Open Defragment and Optimize Drives.

  3. Find your SSD in the list. It should be listed as a Solid state drive; Dell's article uses this to tell SSDs from hard drives.

  4. Under Scheduled optimization, select Change settings.

Microsoft says Windows optimises drives once a week by default. You can change the schedule to daily, weekly or monthly, or turn it off. Leave it on, and make sure your SSDs are ticked in the drive list.

If a drive hasn't been optimised for a long time, the PC may simply be switched off when the scheduled task normally runs: Dell notes that Windows optimises on a schedule unless the computer is usually off at that time.

Step 3: Run a manual retrim (optional)

In Defragment and Optimize Drives, select your SSD and choose Optimize. For a solid state drive this sends TRIM, not a defrag.

Or use PowerShell as administrator. Microsoft's Optimize-Volume documentation gives this example, which re-sends TRIM requests for drive H:

Optimize-Volume -DriveLetter H -ReTrim -Verbose

Replace H with your SSD's drive letter. Microsoft says this is useful on SSD media.

What not to do

  • Don't run third-party defrag tools on an SSD. As Dell says, it brings no benefit.

  • Don't turn off TRIM to "save writes". It exists to help the drive manage free space.

  • Don't treat optimisation as a health check. To see wear and warnings, use our guide to checking SSD health, and keep your drive's firmware current with our SSD firmware update guide.

Other things that genuinely help

Our verdict

Windows 11 already optimises SSDs with TRIM, weekly by default. Check that fsutil behavior query DisableDeleteNotify returns 0 for NTFS, make sure scheduled optimisation is on in Defragment and Optimize Drives, and use Optimize or Optimize-Volume -ReTrim if you want to run it by hand. Never defragment an SSD with third-party tools. Forge PC hasn't tested anything for this guide.

The bottom line

Windows 11 already optimises SSDs with TRIM, weekly by default. Check that `fsutil behavior query DisableDeleteNotify` returns 0 for NTFS, make sure scheduled optimisation is on in Defragment and Optimize Drives, and use Optimize or `Optimize-Volume -ReTrim` if you want to run it by hand. Never defragment an SSD with third-party tools. Forge PC hasn't tested anything for this guide.

Sources

  1. 01Microsoft Support, Defragment / optimize your data drives in Windows
  2. 02Microsoft Learn, fsutil behavior
  3. 03Microsoft Learn, Optimize-Volume
  4. 04Dell Support, Use Disk Defragmenter to boost performance in Windows

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

How to Turn On Hardware-Accelerated GPU Scheduling in Windows 11 (and When to Turn It Off)

How-To

How to Turn On Hardware-Accelerated GPU Scheduling in Windows 11 (and When to Turn It Off)

Open Settings > System > Display > Graphics > Advanced graphics settings, turn on Hardware-accelerated GPU scheduling and restart. NVIDIA says DLSS Frame Generation needs it, and CD PROJEKT RED says it's on by default in Windows 11. If the toggle is missing, update your GPU driver; Microsoft says most users won't notice a significant change otherwise.

Forge PC Staff3 min

How to Run Local AI Models With Docker Model Runner on Windows 11

How-To

How to Run Local AI Models With Docker Model Runner on Windows 11

Install Docker Desktop 4.41 or later, go to Settings > AI and turn on Enable Docker Model Runner, plus Enable GPU-backed inference if you have an NVIDIA GPU with driver 576.57 or newer. Then use docker model pull and docker model run. Enable host-side TCP to connect apps via http://localhost:12434/engines/v1, but keep it private: the API has no authentication.

Forge PC Staff3 min

Project Maya Runs 321B to 748B MoE Models on One GPU by Spreading Them Across VRAM, RAM and SSD

News

Project Maya Runs 321B to 748B MoE Models on One GPU by Spreading Them Across VRAM, RAM and SSD

Project Maya is a free, open-source engine that runs GLM-5.3 (744B), GLM-5.3-Flash (321B), DeepSeek-V4.1-Flash (748B) and MiniMax-M3.1-Flash (428B) on desktop GPUs by keeping the busiest experts in VRAM and the rest in RAM and on an NVMe SSD. It needs an RTX 20-series or newer card (or a supported Radeon), 32GB+ of RAM and 75-350GB of SSD space.

Forge PC Staff4 min

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

How-To

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

Microsoft says System Protection isn't on by default. Search for Create a restore point, select your C: drive, choose Configure and turn it on, then create a restore point before installing drivers or tools. To roll back, run rstrui.exe, or use Troubleshoot > Advanced options > System Restore in Windows RE. Personal files aren't affected, but it isn't a backup.

Forge PC Staff3 min