Skip to content

How-ToSSD

How to Test Your SSD Speed with CrystalDiskMark (and Read the Results)

CrystalDiskMark 9.0.3 is the free, official way to check that an SSD is running as fast as it should. Download it from Crystal Dew World, choose the NVMe SSD profile for an M.2 drive, run All with the default five passes and 1GiB test, and compare the SEQ1M result with your drive's official rating. This guide explains each row and what to check if results are low.

By , Editorial team

4 min read

How to Test Your SSD Speed with CrystalDiskMark (and Read the Results)

Fitted a new NVMe drive and want to know whether it is running at full speed? CrystalDiskMark is the free Windows benchmark most people reach for. It takes a couple of minutes and gives you sequential and random read and write figures you can compare with the manufacturer's rating.

Forge PC has not produced benchmark results for this guide, and we are not publishing example scores. The steps and settings below come from Crystal Dew World's official CrystalDiskMark pages, read on 14 November 2026. The current version listed there is CrystalDiskMark 9.0.3, dated 24 May 2026.

Before you start

  • Use the official site. Download CrystalDiskMark from Crystal Dew World (crystalmark.info). There are a Standard Edition and themed "Aoi" and "Shizuku" editions, which differ in looks, not in the test itself.

  • Check your Windows version. The official requirements cover Windows XP through Windows 11 on x86, x64 and ARM64. The installer and x64 version do not support Windows XP.

  • Don't run it over and over. Crystal Dew World warns that CrystalDiskMark "may shorten SSD/USB Memory life", because each run writes test data. One or two runs are enough.

  • Close heavy apps. Downloads, game updates or a backup running in the background will skew the result.

How to run the test

  1. Download and install (or unzip) the Standard Edition from the official CrystalDiskMark page, then open it.

  2. Set the number of runs, the test size and the drive. The official defaults are 5 runs and a 1GiB test file, which suit an SSD. Crystal Dew World suggests a smaller size for slow storage such as USB sticks.

  3. Choose the right profile. For an NVMe SSD, open Settings and select NVMe SSD. For a SATA SSD or a hard drive, leave it on Default. The official menu also offers Peak Performance, Real World Performance and Demo profiles.

  4. Leave the test data on Random unless you have a reason to change it. The manual notes that some SSDs give different results with random data than with "0 Fill" (all zeros).

  5. Click "All" to run every test, and wait. Don't use the PC while it runs.

  6. Save the result from the File menu as text or an image if you want to compare it later.

If you run CrystalDiskMark with administrator rights, it will not show network drives. Crystal Dew World says to run it without admin rights if you want to test a network drive.

What the four rows mean

Under the Default profile, CrystalDiskMark's official settings are:

Row

What it tests (Default profile)

SEQ1M Q8T1

Large sequential transfers, 1MiB blocks, queue depth 8, one thread. This is the figure most like the "up to" speed on the box.

SEQ1M Q1T1

Large sequential transfers with a queue depth of 1.

RND4K Q32T1

Small random 4KiB reads and writes with a deep queue.

RND4K Q1T1

Small random 4KiB reads and writes, one at a time. This is the hardest test for any drive.

The NVMe SSD profile changes two rows. The second becomes 128KiB sequential at queue depth 32, and the deep random test runs with 16 threads (RND4K Q32T16).

A few more official notes help you read the numbers:

  • MB/s here means 1,000,000 bytes per second, the same decimal unit drive makers use.

  • Results are not comparable between major versions of CrystalDiskMark, so compare like with like.

  • Results depend on the test file size, where the file sits on the drive, fragmentation, the controller and even the CPU.

What to compare against

Start with the first row. Compare the sequential read and write with the "up to" figures on the manufacturer's spec sheet for your exact model and capacity. A result that is a little below the rating is normal. One that is dramatically lower is worth investigating.

If your speeds look too low

  • Check which M.2 slot you used. Many motherboards have a mix of CPU-connected and chipset-connected slots, and some are a PCIe generation slower. A PCIe 5.0 drive in a PCIe 4.0 slot runs at PCIe 4.0 speed. Our PCIe 4.0 vs PCIe 5.0 SSD guide and M.2 install guide explain how to check.

  • Free up space. A nearly full SSD can behave differently. Our disk space guide shows what to clear.

  • Check the drive's health and temperature. CrystalDiskInfo, from the same developer, is covered in our SSD health guide. Drives that run hot may slow down during long tests.

  • Remember the difference between benchmarks and games. A faster CrystalDiskMark score does not mean shorter loading screens in every game, as our NVMe vs SATA comparison explains.

Our verdict

CrystalDiskMark is the quickest way to confirm an SSD is working properly. Download it from Crystal Dew World, select the NVMe SSD profile for an M.2 NVMe drive, run "All" once and compare the SEQ1M row with your drive's official rating. If the numbers are far off, check the M.2 slot and the drive's health before blaming the SSD. Forge PC has not published benchmark results here; this guide follows Crystal Dew World's official documentation.

The bottom line

CrystalDiskMark is the quickest way to confirm an SSD is working properly. Download it from Crystal Dew World, select the NVMe SSD profile for an M.2 NVMe drive, run "All" once and compare the SEQ1M row with your drive's official rating. If the numbers are far off, check the M.2 slot and the drive's health before blaming the SSD. Forge PC has not published benchmark results here; this guide follows Crystal Dew World's official documentation.

Sources

  1. 01Crystal Dew World, CrystalDiskMark official page
  2. 02Crystal Dew World, CrystalDiskMark manual: Main Menu
  3. 03Crystal Dew World, CrystalDiskMark manual: Main Window

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

How-To

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

Microsoft says System Protection isn't on by default. Search for Create a restore point, select your C: drive, choose Configure and turn it on, then create a restore point before installing drivers or tools. To roll back, run rstrui.exe, or use Troubleshoot > Advanced options > System Restore in Windows RE. Personal files aren't affected, but it isn't a backup.

Forge PC Staff3 min

How to Use Live Captions and Translation in Windows 11

How-To

How to Use Live Captions and Translation in Windows 11

Press Windows + Ctrl + L to turn on live captions in Windows 11 22H2 or later, download the language files, then dock or float the captions and pick a style. Captions are generated on the device and work offline. On a Copilot+ PC with 24H2 or later, live captions can translate from over 40 languages into English and 27 into Chinese (Simplified).

Forge PC Staff3 min

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

How-To

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

Run ollama ls to list your models, ollama ps to see what's loaded, ollama stop to unload one and ollama rm to delete it. On Windows, models are stored in C:\Users\%username%\.ollama\models; to move them, quit Ollama, set an OLLAMA_MODELS user environment variable to a folder on a bigger drive and restart Ollama.

Forge PC Staff3 min

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

Best Picks

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

The best free PC benchmarks in 2026: Cinebench 2026 for CPUs, Unigine Superposition Basic or 3DMark's free Steel Nomad test for graphics cards, CrystalDiskMark for SSDs, Geekbench 7 for cross-platform scores, Geekbench AI for NPUs, Blender Benchmark for creators and OCCT for stability. Run each test twice and download only from official sites.

Forge PC Staff5 min