Skip to content

How-ToSSD

How to Update Your SSD's Firmware Safely (Samsung, Kingston and Crucial)

To update SSD firmware, back up your data and use the drive maker's free tool: Samsung Magician, Kingston SSD Manager or Crucial Storage Executive. Each can check for and install firmware updates on supported drives. Keep the drive connected directly to the motherboard rather than via a USB adapter, and do not interrupt the update. Forge PC has not tested these tools.

By , Editorial team

4 min read

How to Update Your SSD's Firmware Safely (Samsung, Kingston and Crucial)

Your SSD runs its own small operating system, called firmware, and manufacturers release updates to fix bugs and improve stability. SSD makers deliver these updates through their own apps and support pages, so if you have never checked, your drive may still be on the firmware it shipped with.

Forge PC has not tested these tools. The steps below follow the official support pages from Samsung, Kingston and Crucial, as published on 15 November 2026.

Why bother?

Firmware updates are mostly about reliability. Samsung's firmware page gives typical examples: one update for the 990 PRO is listed "to improve read-operation stability", while a 990 EVO update is "to improve link stability and VMD driver compatibility". You will not usually see a speed boost, but you may avoid a known problem.

If your drive is behaving oddly, check its condition first with our SSD health guide.

Before you start

  1. Back up anything important. A firmware update should not erase your data, but any change to a drive carries a small risk. Our Windows 11 backup guide shows the quickest way.

  2. Find out exactly which SSD you have. Our guide to checking your PC's specs shows where Windows lists the model.

  3. Plug in your laptop and make sure nothing will interrupt the update. Do not turn the PC off while it runs.

  4. Connect the drive directly to the motherboard. Kingston, for example, says USB enclosures are not supported by its tool.

Samsung SSDs: Samsung Magician

Samsung says its Magician software is designed to work with all Samsung memory products, including internal SSDs, and its tools page listed Magician version 9.0.1 for Windows on 15 November 2026.

  1. Download and install Samsung Magician from Samsung's tools page.

  2. Open it and check Drive Details, which Samsung says shows your firmware. If new firmware is available, an "Updated version is available" notice appears next to the firmware name, or you can check with the Update button.

  3. Apply the update and follow the prompts. Samsung warns that the PC shuts down automatically after a firmware update, with a 20-second countdown, and a reboot is needed for the new firmware to take effect, so save your work first.

Samsung's FAQ also notes that firmware updates may fail on Samsung SSDs connected to an AMD storage controller, in which case it suggests retrying with the standard Microsoft AHCI driver. Magician does not support SSDs in BIOS RAID mode.

Samsung also publishes firmware as ISO files for each NVMe and SATA drive, but notes that these "may be used only via DOS using a bootable CD/DVD". For most people, Magician is far simpler.

Kingston SSDs: Kingston SSD Manager

Kingston's support page says Kingston SSD Manager can monitor drive health, show the firmware version and update drive firmware.

  1. Download Kingston SSD Manager x64 (version 1.5.6.5 on 15 November 2026) for current drives. Kingston says some older drives need the legacy version 1.1.2.6 instead.

  2. Run the installer as administrator. Kingston says you need administrator rights in Windows and that a reboot may be required after installing.

  3. Open the app, select your drive and use its firmware update option if one is offered.

Kingston says the x64 version supports Windows 10 and 11 only, and the app does not run on macOS or Linux.

Crucial SSDs: Storage Executive

Crucial says its free Storage Executive tool lets you see how much space you have used, download the latest firmware and monitor the drive's temperature.

  1. Download Storage Executive from Crucial's support site (version 12.09 for Windows on 15 November 2026). Crucial says it is only available for 64-bit systems.

  2. Open it, select your Crucial SSD and check for a firmware update.

  3. Crucial also keeps a separate firmware and support page for each model, including older drives such as the P2 and MX300.

Other brands

Most SSD makers offer a similar app or firmware download on their support site. Search for your exact model plus "firmware". Avoid firmware files from anywhere other than the manufacturer.

After the update

  • Check the app again to confirm the new firmware version is shown.

  • If the PC will not boot from the drive afterwards, go into the BIOS and check that it is still the first boot device. Our BIOS update guide explains how to get into the BIOS safely.

  • Moving to a new drive instead? See our guide to cloning an SSD with free tools.

Our verdict

To update an SSD's firmware, back up first, then use the manufacturer's own app: Samsung Magician for Samsung drives, Kingston SSD Manager for Kingston and Crucial Storage Executive for Crucial. Each is free, and the manufacturer's tool is the safe source of firmware for your drive. Keep the drive connected directly to the motherboard and do not interrupt the update. Forge PC has not tested these tools; the steps follow each manufacturer's support pages as published on 15 November 2026.

The bottom line

To update an SSD's firmware, back up first, then use the manufacturer's own app: Samsung Magician for Samsung drives, Kingston SSD Manager for Kingston and Crucial Storage Executive for Crucial. Each is free, and the manufacturer's tool is the safe source of firmware for your drive. Keep the drive connected directly to the motherboard and do not interrupt the update. Forge PC has not tested these tools; the steps follow each manufacturer's support pages as published on 15 November 2026.

Sources

  1. 01Samsung Semiconductor, Consumer storage tools (Magician and firmware)
  2. 02Samsung Semiconductor, Samsung Magician software and FAQs
  3. 03Kingston, Kingston SSD Manager
  4. 04Crucial, Crucial Storage Executive Tool
  5. 05Crucial, SSD firmware and support

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

How-To

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

Microsoft says System Protection isn't on by default. Search for Create a restore point, select your C: drive, choose Configure and turn it on, then create a restore point before installing drivers or tools. To roll back, run rstrui.exe, or use Troubleshoot > Advanced options > System Restore in Windows RE. Personal files aren't affected, but it isn't a backup.

Forge PC Staff3 min

How to Use Live Captions and Translation in Windows 11

How-To

How to Use Live Captions and Translation in Windows 11

Press Windows + Ctrl + L to turn on live captions in Windows 11 22H2 or later, download the language files, then dock or float the captions and pick a style. Captions are generated on the device and work offline. On a Copilot+ PC with 24H2 or later, live captions can translate from over 40 languages into English and 27 into Chinese (Simplified).

Forge PC Staff3 min

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

How-To

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

Run ollama ls to list your models, ollama ps to see what's loaded, ollama stop to unload one and ollama rm to delete it. On Windows, models are stored in C:\Users\%username%\.ollama\models; to move them, quit Ollama, set an OLLAMA_MODELS user environment variable to a folder on a bigger drive and restart Ollama.

Forge PC Staff3 min

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

Best Picks

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

The best free PC benchmarks in 2026: Cinebench 2026 for CPUs, Unigine Superposition Basic or 3DMark's free Steel Nomad test for graphics cards, CrystalDiskMark for SSDs, Geekbench 7 for cross-platform scores, Geekbench AI for NPUs, Blender Benchmark for creators and OCCT for stability. Run each test twice and download only from official sites.

Forge PC Staff5 min