If moving objects leave a faint trail behind them, or a bright halo appears around them, your monitor is showing motion artifacts. The most common cause on LCD monitors (IPS, VA and TN) is the overdrive setting, sometimes called response time. You can usually fix it in a few minutes with the monitor's on-screen menu and a free browser test.
This guide is based on Blur Busters' documentation of overdrive artifacts and its TestUFO tools. Forge PC hasn't tested specific monitors for this article. The best setting varies by model, so test your own screen rather than copying someone else's numbers.
Ghosting vs overshoot (inverse ghosting)
Overdrive pushes LCD pixels to change state faster by briefly applying a stronger voltage. Blur Busters describes the trade-off:
Too little overdrive leaves ghosting: a darker trail behind moving objects.
Too much overdrive causes coronas, also called inverse ghosting or overshoot: a bright or coloured halo around the edges of moving objects.
The aim is the setting where both are least noticeable. Monitor makers give it different names. Blur Busters notes that ASUS uses "Trace Free", BenQ uses "AMA" and Acer uses "Overdrive". Other brands may call it Response Time or OD.
Step 1: Make sure your refresh rate is set correctly
Before you change overdrive, check that Windows is actually running your monitor at its full refresh rate. A 165Hz monitor left at 60Hz will look blurrier in motion whatever overdrive you choose. Our guide to changing your monitor's refresh rate shows where to find the setting. Use a cable and port that support your monitor's full refresh rate. See DisplayPort vs HDMI if you're not sure.
Step 2: Run the TestUFO ghosting test
Open testufo.com/ghosting in your browser on the monitor you're testing. Close other heavy apps so the animation runs smoothly.
Watch the moving UFOs. Look at the edges of the UFO and the background around it.
A dark trail behind the UFO means ghosting. A bright outline or halo means overshoot.
Blur Busters runs this test with a pursuit camera to photograph the artifacts. You don't need one. Just watch the screen and follow the UFO with your eyes.
Step 3: Try each overdrive level
Open your monitor's on-screen menu (OSD) and find the overdrive setting (Trace Free, AMA, Overdrive, Response Time or similar).
Start at the lowest setting, then step up one level at a time, rerunning the UFO test at each step.
Stop at the level where trails are mostly gone and before bright halos appear.
In Blur Busters' example ASUS monitor, low Trace Free values showed visible ghosting, the highest values added coronas, and a middle setting (Trace Free 60) was the best compromise. Your monitor will differ, but the pattern is typical: the highest setting is often not the best one.
Step 4: Recheck at the refresh rate you actually play at
Overdrive can behave differently at different refresh rates, so a setting that looks clean at your maximum refresh rate may overshoot at lower frame rates. If you use G-SYNC or FreeSync and your frame rate varies a lot in games, test at more than one refresh rate. Choose the setting that looks acceptable across the range you use. Our G-SYNC vs FreeSync guide explains variable refresh rate.
Other things that look like ghosting
Motion blur from the panel itself. Even with ideal overdrive, sample-and-hold displays blur fast motion. Higher refresh rates help. See 144Hz vs 240Hz and GtG vs MPRT response time.
In-game motion blur. Many games add their own blur effect. Turn it off in the graphics settings before you judge the monitor.
Flicker or black screens. These are a different problem. See how to fix monitor flickering.
Our verdict
Most ghosting is a settings issue, not a faulty monitor. First make sure Windows is running your monitor at its full refresh rate. Then open testufo.com/ghosting and step through the overdrive setting (Trace Free, AMA, Overdrive or Response Time) until dark trails fade but before bright halos appear. That's usually a middle setting rather than the maximum. If you use variable refresh rate, recheck at the frame rates you actually play at.