When you click Shut down in Windows 11, your PC might not be fully shutting down. A feature called Fast Startup is on by default on most PCs. It saves part of the system's state to disk so the next boot is quicker. That's handy on a slow hard drive, but on a modern PC with an SSD it can cause more trouble than it's worth.
This guide is based on Microsoft's documentation of Windows startup modes and Windows Central's Fast Startup guide. Forge PC hasn't timed boot speeds with and without it.
What Fast Startup actually does
Microsoft describes three ways Windows can start: a cold (traditional) start, waking from hibernation, and fast startup, which combines the first two. In a cold start, Windows loads the kernel, detects your hardware and loads drivers from scratch. A fast startup instead loads the hibernation file (hiberfil.sys) into memory, which Microsoft says tends to take significantly less time.
Windows Central explains the difference from normal hibernation. With hibernation, your whole session (open apps and all) is saved. With Fast Startup, Windows signs you out first and then saves only the kernel and loaded drivers.
When to turn it off
According to Windows Central, consider disabling Fast Startup if:
You dual-boot. If another operating system changes files on your Windows partition while Fast Startup is on, Windows may discard those changes when it resumes. See our dual-boot Windows 11 and Linux guide.
You have boot or shutdown problems, or updates that won't finish. Windows Central says Fast Startup can interfere with driver initialisation, firmware updates, BitLocker and updates that need a full shutdown. If an update is stuck, our Windows Update troubleshooting guide has more fixes.
You're short of storage. Fast Startup relies on the hibernation file, which can take up several gigabytes.
Windows Central says the speed benefit is minimal on PCs with NVMe or SATA SSDs, and most noticeable on older machines with hard drives.
How to turn off Fast Startup
Open Control Panel (search for it from Start).
Click Hardware and Sound, then Power Options.
Click Choose what the power buttons do (Windows Central's guide calls it "Choose what the power button does").
Click Change settings that are currently unavailable.
Under Shutdown settings, untick Turn on fast startup (recommended).
Click Save changes.
The next time you shut down, Windows will do a full shutdown, and the following boot will be a cold start. To turn it back on, repeat the steps and tick the box again.
If the Fast Startup option is missing
Fast Startup depends on hibernation. Windows Central says that if the option isn't in Power Options, hibernation is probably turned off:
Search for Command Prompt, right-click it and choose Run as administrator.
Run powercfg /availablesleepstates to see which power states your PC supports. Check that Fast Startup is listed.
Run powercfg /hibernate on to enable hibernation. The Fast Startup option should then appear in Power Options.
If it's still missing, Windows Central notes your PC may not support the ACPI S4 (hibernate) power state.
Our verdict
Fast Startup speeds up booting by restoring the Windows kernel and drivers from the hibernation file instead of starting from scratch. On an SSD-equipped PC the gain is small, so turn it off if you dual-boot, have update, driver or boot problems, or need the disk space. Untick "Turn on fast startup" in Control Panel > Power Options > Choose what the power buttons do. If the option is missing, enable hibernation with powercfg /hibernate on.