A new high refresh rate monitor is one of the most noticeable upgrades you can make to a gaming PC, but only if it is actually running at its rated speed. It is common for a 144Hz, 165Hz or 240Hz screen to sit at 60Hz because Windows picked a safe default, the wrong cable is in use, or it is plugged into the wrong socket.
This guide is based on official documentation from Microsoft, NVIDIA and AMD, checked on 14 November 2026. Forge PC has not tested every monitor and graphics card combination, so check your monitor's manual for model-specific settings.
Step 1: Check and set the refresh rate in Windows 11
Open Start > Settings > System > Display.
If you have more than one screen, select the monitor you want to change at the top of the page.
Scroll down and select Advanced display.
The Display information panel shows the current resolution and refresh rate, and whether the display supports variable refresh rate (VRR).
Next to Choose a refresh rate, pick the highest rate your monitor is rated for.
Microsoft notes that the list only shows rates your display and connection support. An asterisk (*) next to a rate means it does not work at your current resolution: choosing it will change your resolution to reach that refresh rate. Leave the resolution at your monitor's native setting unless you have a reason not to.
Step 2: If the rate you want is missing, check the connection
If your 165Hz monitor only offers 60Hz in Windows, the problem is usually the link between the PC and the monitor.
Plug into the graphics card, not the motherboard. If your PC has a separate graphics card, the monitor cable should go into one of the outputs on the card itself, lower down on the back of the PC. The motherboard's video outputs use the processor's integrated graphics, if it has any. Our no display troubleshooting guide covers this in more detail.
Prefer DisplayPort for PC monitors. Many high refresh rate monitors reach their top speed only over DisplayPort, or only over HDMI 2.1, and older HDMI ports may be limited to lower refresh rates at higher resolutions. Your monitor's manual lists the maximum refresh rate for each input.
Use a good cable. Use the cable that came with the monitor, or one certified for the speed you need. Long, old or cheap cables are a common cause of missing refresh rates and flickering.
Check the monitor's own menu. Some monitors have settings in their on-screen display (OSD), such as a DisplayPort version option or an "overclock" mode, that must be switched on before the top refresh rate appears. AMD's FreeSync guide, for example, tells users to check that the monitor's DisplayPort setting is 1.2 or higher.
Update your graphics driver. An old or generic driver can limit the modes Windows offers. Our graphics driver update guide shows how.
Step 3: Turn on G-SYNC or FreeSync
Variable refresh rate lets the monitor match its refresh rate to your game's frame rate, which reduces tearing and stutter. Microsoft points out that many games use VRR automatically if your display supports it.
NVIDIA GeForce cards
According to NVIDIA, GTX 10-series and newer cards support VESA Adaptive-Sync over DisplayPort 1.2a or later. Monitors on NVIDIA's "G-SYNC Compatible" list are enabled automatically. For other Adaptive-Sync monitors:
Open NVIDIA Control Panel.
Go to Display > Set up G-SYNC.
Tick Enable G-SYNC, G-SYNC Compatible and Enable settings for the selected display model, then apply.
Over HDMI, NVIDIA says VRR needs a GTX 16-series, RTX 20-series or newer card and a display that supports VRR over HDMI 2.1. That means a FreeSync monitor with only older HDMI ports will not get VRR from an NVIDIA card over HDMI, so use DisplayPort.
AMD Radeon cards
AMD says FreeSync works over both HDMI and DisplayPort and should be enabled by default once the Radeon driver is installed. To check:
Turn on FreeSync (sometimes called Adaptive-Sync) in the monitor's on-screen menu.
Open AMD Software: Adrenalin Edition and go to the Display tab.
Make sure AMD FreeSync is on.
What about Dynamic Refresh Rate?
Windows 11 also has a Dynamic refresh rate (DRR) toggle on the same Advanced display page. It lowers the refresh rate when you are doing little on screen and raises it when you scroll or ink, mainly to save power on laptops. Microsoft says it needs a display with VRR and a refresh rate of at least 120Hz. It also warns that DRR can limit the maximum refresh rate in some games, so turn it off if a game seems capped.
Step 4: Check it worked
Revisit Settings > System > Display > Advanced display and confirm the refresh rate stuck.
Many monitors show the current refresh rate in their on-screen information menu.
In games, check that the in-game refresh rate setting (if there is one) matches your monitor, and that a frame rate cap is not set lower than you expect. Our Windows 11 gaming settings guide and gaming PC performance checklist cover other settings worth checking, and our HWiNFO and Afterburner guide shows how to display your frame rate.
If you are still choosing a screen, our best 1440p gaming monitor and best 1080p gaming monitor guides list the refresh rates and inputs for each model, and our 1080p vs 1440p vs 4K comparison explains which resolution suits your graphics card.
Our verdict
To change your monitor's refresh rate in Windows 11, go to Settings > System > Display > Advanced display and choose the highest rate next to "Choose a refresh rate". If the rate you paid for is missing, plug the monitor into the graphics card rather than the motherboard, use DisplayPort or the right HDMI port with a good cable, check the monitor's menu and update your graphics driver. Then turn on G-SYNC in NVIDIA Control Panel or confirm FreeSync is on in AMD's Adrenalin software. Forge PC has not tested every setup; these steps follow Microsoft, NVIDIA and AMD's official guidance.