Skip to content

VersusCase

Back-Connect vs Standard Motherboards: Are Hidden-Connector Builds Worth It?

Back-connect motherboards such as ASUS's BTF range put the power and header connectors on the back of the board, so cables are hidden behind the tray. They need a case with matching tray cutouts, though ASUS says standard coolers, PSUs, SSDs and RAM still work, and NZXT's 2026 H5 and H7 add support. For most builders, a standard board is still the practical choice. Forge PC has not tested back-con

By , Editorial team

3 min read

Back-Connect vs Standard Motherboards: Are Hidden-Connector Builds Worth It?
NZXT H5 (2026) Compact Mid-Tower ATX Case compared with NZXT H7 (2026) Mid-Tower ATX Case
NZXT H5 (2026) Compact Mid-Tower ATX CaseNZXT H7 (2026) Mid-Tower ATX Case
Case TypeMid TowerMid Tower
Supported Motherboard Form FactorsATX / Micro-ATX / Mini-ITXATX / Micro-ATX / Mini-ITX
Max GPU Length (mm)420495
Max CPU Air Cooler Height (mm)172188
Max PSU Length (mm)—200
Cable Management Clearance (mm)—42
Max Radiator Top360mm420mm
Max Radiator Rear120mm140mm
Max Fan Support (Top)3—
Max Fan Support (Rear)1—
Max Fan Support (Bottom)3—
2.5" Drive Mounts25
3.5" Drive Mounts12
Expansion Slot Count7—

Shop for a mechanical keyboard and you will quickly be asked to choose a switch: red, brown or blue, or a manufacturer's own name for the same three ideas. Those colours match Cherry's MX switches, and the three ideas behind them, linear, tactile and clicky, still describe most mechanical keyboards.

Forge PC has not tested these switches. The figures below are Cherry's official specifications for its current MX2A Red, Brown and Blue switches, checked on 15 November 2026. Other brands' "red", "brown" and "blue" switches are similar in spirit but not identical, so check each keyboard's switch specification.

The three types in one table

Cherry MX2A switch

Type

Operating force

Pre-travel

Total travel

Click

Rated lifespan

Red

Linear

45cN

2.0mm

4.0mm

No

Over 100 million keystrokes

Brown

Tactile

55cN

2.0mm

4.0mm

No

Over 100 million keystrokes

Blue

Tactile and audible (clicky)

60cN

2.2mm

4.0mm

Yes

Over 50 million keystrokes

Operating force is how hard you press to register a key, and pre-travel is how far the key moves before it does.

Linear (red): smooth and light

Cherry describes the MX Red as having a linear switching characteristic with low spring resistance that "triggers directly". There is no bump and no click; the key moves smoothly from top to bottom. With the lowest operating force of the three (45cN), Red switches are easy to press quickly and repeatedly. Cherry also calls the Red the first choice for beginners.

The trade-off is that there is no physical sign that a key has registered, so some typists bottom out every key or press keys by accident.

Tactile (brown): a bump you can feel

The MX Brown adds a bump partway down the stroke. Cherry says it gives "noticeable feedback" that tells you where the switch triggers, without the click. At 55cN, it needs a little more force than Red.

Tactile switches are a common compromise for people who type and game on the same keyboard. You can feel each keystroke register, but they are still quiet enough for a shared room.

Clicky (blue): feedback you can hear

The MX Blue is tactile and audible. Cherry explains that its two-part slider produces a distinct click after the tactile point. It has the highest operating force (60cN), slightly longer pre-travel (2.2mm), and Cherry's rated lifespan is lower at over 50 million keystrokes.

Many people enjoy typing on clicky switches, but they are loud. On voice chat or a stream, and in an office or shared house, that click will be noticed.

What about Hall effect and optical switches?

Magnetic Hall effect switches, used in keyboards such as the Wooting 80HE and SteelSeries Apex Pro Gen 3, let you adjust where a key triggers, which a fixed mechanical switch can't do. If fast, adjustable actuation is your priority, read our Hall effect vs mechanical keyboard comparison first.

Which should you choose?

Choose linear if: - you mainly play games, especially fast-paced ones - you want the lightest, smoothest press

Choose tactile if: - you type a lot as well as game - you want feedback without the noise

Choose clicky if: - typing feel matters more than noise - you don't share a room, stream or use an open mic

If you can, try a switch tester or a shop demo board before you buy. For keyboards we recommend, see our best gaming keyboards guide.

Our verdict

There is no single best switch. Linear switches like Cherry's MX2A Red are the light, smooth choice for gaming; tactile switches like the Brown suit people who type and game on one keyboard; and clicky switches like the Blue give the most feedback but are the loudest and, on Cherry's ratings, the shortest-lived of the three. If you game on voice chat or share a room, avoid clicky switches. Forge PC has not tested these switches; specifications are from Cherry.

The bottom line

Back-connect motherboards such as ASUS's BTF range deliver the cleanest-looking builds, and support is spreading to mainstream cases like NZXT's 2026 H5 and H7. But they limit your choice of case and motherboard, and ASUS's graphics card power slot ties you further into one ecosystem. For most builders, a standard motherboard and good cable management is still the practical choice; go back-connect if looks come first and you have confirmed every part is compatible. Forge PC has not tested back-connect hardware; details are from ASUS and NZXT. For case ideas, see our best PC cases.

Sources

  1. 01ASUS, Installation Guide and Precautions for BTF Series
  2. 02ASUS, ASUS Unveils BTF Motherboards and Graphics Cards with Hidden Connectors
  3. 03ASUS, Hidden Connector Design
  4. 04NZXT, NZXT Launches H7 and H5 Cases in Single-Piece Curved Glass, Plus Kraken Coolers

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

Two vs Four RAM Sticks for DDR5: Why 2x32GB Usually Beats 4x16GB

Versus

Two vs Four RAM Sticks for DDR5: Why 2x32GB Usually Beats 4x16GB

Two DDR5 sticks are better for most builds. AMD lists DDR5-5600 as the AM5 maximum with two modules but DDR5-3600 with four, and XMP or EXPO speeds above that are overclocking and not guaranteed. Buy 2x16GB or 2x32GB for 32GB or 64GB, and use four sticks, ideally a matched kit, only if you need 128GB or more.

Forge PC Staff3 min

Best Wi-Fi 7 PCIe Card for Desktop PCs in 2026

Best Picks

Best Wi-Fi 7 PCIe Card for Desktop PCs in 2026

The TP-Link Archer TBE550E is the best Wi-Fi 7 PCIe card for most desktops: it works on AMD systems, supports 320MHz and MLO and was about £85 at Scan (17 Nov 2026), but it's Windows 11 only. The ASUS PCE-BE92BT (about £51) suits recent Intel PCs only. The ASUS PCE-BE6500 (about £34) is the budget pick.

Forge PC Staff4 min

SFX vs SFX-L vs ATX Power Supply: Which PSU Size Do You Need?

Versus

SFX vs SFX-L vs ATX Power Supply: Which PSU Size Do You Need?

ATX power supplies are 150 x 86mm with a depth of 140mm or more; SFX units are 125 x 63.5 x 100mm and SFX-L units are 125 x 63.5 x 130mm. Buy ATX for normal towers, SFX for compact mini-ITX cases and SFX-L only if your case supports it. An SFX unit can fit an ATX case with a bracket, but an ATX unit won't fit an SFX-only case.

Forge PC Staff4 min

ARGB vs RGB: 5V 3-Pin and 12V 4-Pin Headers Explained (and How Not to Fry Them)

Versus

ARGB vs RGB: 5V 3-Pin and 12V 4-Pin Headers Explained (and How Not to Fry Them)

5V ARGB uses a 3-pin header and controls each LED individually for animations and gradients; 12V RGB uses a 4-pin header and shows one colour at a time. They aren't interchangeable, and plugging either into the wrong header can permanently damage the lighting, the motherboard or both. Check the pin count and the board label, and use a controller if needed.

Forge PC Staff4 min