Skip to content

How-ToOS

How to Test Your Home Network Speed With iperf3

iperf3 measures the speed of your own network rather than your internet connection. Install it on two devices, run iperf3 -s on one and iperf3 -c with its IP address on the other, then use -R for the reverse direction and -P for parallel streams to find Wi-Fi, cable or port bottlenecks.

By , Editorial team

3 min read

How to Test Your Home Network Speed With iperf3

An online speed test tells you how fast your broadband is. It can't tell you whether the link between your PC and your NAS, your second PC or your router is running as fast as it should. iperf3 can: it's a free command-line tool that sends test traffic between two devices on your own network and reports the throughput. This guide is based on ESnet's iperf3 documentation; Forge PC hasn't benchmarked any particular network here, so the examples show what to type, not results to expect.

What you need

  • Two devices on the same network, such as two PCs, or a PC and a laptop. One acts as the server and the other as the client.

  • iperf3 on both. ESnet, which develops iperf3, says it doesn't distribute binary packages itself; on Ubuntu you can install it with sudo apt-get install iperf3, on macOS with brew install iperf3, and ESnet points Windows users to third-party Windows builds (it lists files.budman.pw as one location).

  • The server's local IP address. On Windows, open Command Prompt and run ipconfig; look for the IPv4 address of the adapter you're testing.

One caveat: ESnet says iperf3's officially supported platforms are Ubuntu Linux, FreeBSD and macOS, and the Windows builds it points to are provided by third parties.

Step 1: Start the server

On the first device, open a terminal and run:

iperf3 -s

By default the server listens on TCP port 5201. If your firewall asks, allow iperf3 on your private network. Leave this window open.

Step 2: Run a test from the client

On the second device, run this, replacing the address with your server's IP:

iperf3 -c 192.168.1.50

By default a test lasts 10 seconds and sends data from the client to the server. iperf3 prints a line for each second and a summary at the end, with the sender and receiver bitrates.

Step 3: Test the other direction and with more streams

Useful options from the iperf3 manual:

Option

What it does

-R

Reverse the test, so the server sends to the client

--bidir

Test both directions at the same time

-P 4

Run four parallel streams

-t 30

Run for 30 seconds instead of the default 10

-p 5202

Use a different port (default 5201), on both server and client

-u -b 100M

UDP test at a target bitrate of 100Mbit/s (the UDP default is 1Mbit/s)

-1

Server handles one client connection, then exits

A sensible routine is a normal test, a -R test and a -P 4 test, then repeat over Wi-Fi from where you actually game.

How to read the results

Compare the result with the slowest link in the path:

If both devices and your switch support 2.5GbE, our 2.5GbE vs 1GbE explainer covers what changes. iperf3 measures throughput; for lag spikes in games, see how to fix high ping and packet loss instead.

Our verdict

iperf3 is the quickest way to find out whether your home network, not your broadband, is the bottleneck. Run iperf3 -s on one device and iperf3 -c with that device's IP on another, test both directions with -R, and compare the result with your slowest cable, port or Wi-Fi link.

The bottom line

iperf3 is the quickest way to find out whether your home network, not your broadband, is the bottleneck. Run `iperf3 -s` on one device and `iperf3 -c` with that device's IP on another, test both directions with `-R`, and compare the result with your slowest cable, port or Wi-Fi link.

Sources

  1. 01ESnet, iperf3 documentation: Invoking iperf3
  2. 02ESnet, iperf3 documentation: Obtaining iperf3
  3. 03ESnet, iperf3 on GitHub

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

Cudy WR5000: A BE5000 Wi-Fi 7 Router With a 2.5G Port and Fast VPN

News

Cudy WR5000: A BE5000 Wi-Fi 7 Router With a 2.5G Port and Fast VPN

Cudy announced the WR5000 on 20 November 2026: a dual-band BE5000 Wi-Fi 7 router with a 3T3R 5GHz radio, MLO, a 2.5G WAN port, four Gigabit LAN ports and fast WireGuard and OpenVPN on its new firmware. There's no 6GHz band, and Cudy hasn't given a UK price.

Forge PC Staff3 min

How to Customise the Right-Click Menu in Windows 11

How-To

How to Customise the Right-Click Menu in Windows 11

Windows 11's updated File Explorer context menu, rolling out with the November 2026 update, can be customised: select Customize menu to turn built-in commands and app extensions on or off, show Cut, Copy and Paste as text and move Properties to the bottom. The rollout is gradual.

Forge PC Staff2 min

How to Check Your Wi-Fi Signal Strength in Windows 11

How-To

How to Check Your Wi-Fi Signal Strength in Windows 11

Check Wi-Fi signal strength in Windows 11 from the taskbar bars, Settings > Network & internet, or exactly with netsh wlan show interfaces (the Signal percentage). Windows Central treats 80-100% as reliable and below 60% as weak. netsh wlan show wlanreport summarises recent wireless sessions.

Forge PC Staff2 min