Skip to content

How-ToGPU

How to Reduce Input Lag in PC Games: Reflex, Anti-Lag, VRR and Frame Caps

To reduce input lag on a gaming PC, run your monitor at its full refresh rate, enable NVIDIA Reflex or AMD Anti-Lag in supported games, and pair G-SYNC or FreeSync with a frame rate cap at least 3fps below your refresh rate, as Blur Busters recommends. Windows 11's optimisations for windowed games help borderless DirectX 10 and 11 titles. Forge PC has not measured input lag.

By , Editorial team

4 min read

How to Reduce Input Lag in PC Games: Reflex, Anti-Lag, VRR and Frame Caps

Input lag is the delay between moving your mouse or pressing a key and seeing the result on screen. A little is unavoidable, but the wrong settings can add a lot, and it is most noticeable in fast shooters. The good news is that most of the fixes are free settings changes.

Forge PC has not measured input lag. The settings below come from NVIDIA's and AMD's official pages, Microsoft's support documentation and Blur Busters' G-SYNC 101 guide, which is based on its own latency testing.

1. Use your monitor's full refresh rate

A 144Hz monitor running at 60Hz feels sluggish. Check that Windows is set to the highest refresh rate your screen supports, and that you are using a cable and port that can carry it. Our refresh rate guide shows how.

2. Turn on NVIDIA Reflex or AMD Anti-Lag

These are the biggest single fixes in supported games.

  • NVIDIA Reflex is an in-game setting. NVIDIA says Reflex Low Latency "reduces PC latency through precise synchronization of rendering across GPU and CPU". Look for NVIDIA Reflex Low Latency in a game's graphics menu and set it to On, or On + Boost. Blur Busters explains that Boost stops the GPU dropping below its base boost clocks, at the cost of a little more power.

  • AMD Radeon Anti-Lag is turned on in the AMD Software app, either per game or as part of the one-click HYPR-RX profile. AMD says it works in DirectX 9, 11 and 12 games on Radeon RX 400-series and newer cards.

  • AMD Radeon Anti-Lag 2 is AMD's newer version. AMD says it is built into games by their developers, so look for it in the game's own settings. AMD lists Counter-Strike 2, Dota 2 and Ghost of Tsushima Director's Cut among the supported titles.

3. Use G-SYNC or FreeSync with a frame rate cap

Variable refresh rate (VRR), sold as G-SYNC or FreeSync, lets your monitor refresh when each frame is ready, which removes tearing without the full delay of traditional V-Sync. Blur Busters' recommended setup for G-SYNC is:

  1. Turn G-SYNC on in the NVIDIA Control Panel (or NVIDIA App).

  2. Turn V-Sync on in the NVIDIA Control Panel and off in the game.

  3. Cap your frame rate at least 3fps below your monitor's refresh rate. Blur Busters gives examples of 141fps at 144Hz and 117fps at 120Hz.

The cap matters because, without it, a game that runs faster than your refresh rate hits the V-Sync limit and lag rises. Blur Busters adds that in games with Reflex, Reflex can apply a suitable cap for you automatically when combined with G-SYNC and V-Sync, for example around 138fps at 144Hz and around 224fps at 240Hz.

AMD FreeSync works on the same principle. If your monitor supports it, enable it in AMD Software and on the monitor itself.

4. If a game has no Reflex: NVIDIA Low Latency Mode

NVIDIA Control Panel's Low Latency Mode is a driver-level option for games without Reflex. Blur Busters suggests On if you already use a frame rate cap, or Ultra if you do not, and notes that Reflex overrides it in games that support Reflex. It also says Low Latency Mode is not supported in Vulkan games.

5. Let Windows optimise windowed games

Many people play in borderless windowed mode for easy alt-tabbing. Microsoft says Windows 11's Optimizations for windowed games improve performance in DirectX 10 and 11 games in windowed and borderless modes by switching them to a newer presentation model, "reducing frame latency" and enabling features such as Auto HDR and variable refresh rate. Microsoft says it is turned on automatically, and you can manage it per game under Settings > System > Display > Graphics. Our Windows 11 gaming settings guide covers the rest of the Windows tweaks.

6. Keep your frame rate up, and steady

Higher frame rates mean each frame reaches the screen sooner. If your GPU is maxed out, lower the heaviest settings, or use upscaling. Note that frame generation adds smoothness but not responsiveness; our DLSS, FSR and frame generation explainer explains why. Stutter feels like lag too, so see our stuttering fixes if frame times are uneven.

7. Check your connection and peripherals

Not all lag happens in your PC. In online games, a wired connection is usually more consistent than Wi-Fi; our Wi-Fi vs Ethernet guide explains the options. If you use a wireless mouse, our wired vs wireless mouse guide covers the trade-offs.

Our verdict

To cut input lag, set your monitor to its full refresh rate, turn on NVIDIA Reflex or AMD Anti-Lag wherever a game offers it, and use G-SYNC or FreeSync with a frame rate cap at least 3fps below your refresh rate, as Blur Busters recommends. In games without Reflex, NVIDIA's Low Latency Mode is the fallback. Windows 11's optimisations for windowed games help borderless DirectX 10 and 11 titles. Forge PC has not measured input lag; these settings follow NVIDIA, AMD, Microsoft and Blur Busters' published guidance.

The bottom line

To cut input lag, set your monitor to its full refresh rate, turn on NVIDIA Reflex or AMD Anti-Lag wherever a game offers it, and use G-SYNC or FreeSync with a frame rate cap at least 3fps below your refresh rate, as Blur Busters recommends. In games without Reflex, NVIDIA's Low Latency Mode is the fallback. Windows 11's optimisations for windowed games help borderless DirectX 10 and 11 titles. Forge PC has not measured input lag; these settings follow NVIDIA, AMD, Microsoft and Blur Busters' published guidance.

Sources

  1. 01NVIDIA UK, NVIDIA Reflex 2 Technology
  2. 02AMD, AMD Radeon Anti-Lag
  3. 03Blur Busters, G-SYNC 101: Optimal G-SYNC Settings and Conclusion
  4. 04Microsoft Support, Optimizations for windowed games in Windows 11

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

27-inch vs 32-inch Monitor: Which Size Is Better for Gaming and Work?

Versus

27-inch vs 32-inch Monitor: Which Size Is Better for Gaming and Work?

A 32-inch 16:9 monitor has about 40% more screen area than a 27-inch one, but it only looks sharp at 4K (about 138 PPI); 32-inch 1440p drops to about 92 PPI. Buy 27-inch for 1440p, competitive gaming and desks under about 80cm deep, and 32-inch 4K for immersive games and productivity if you can sit around 80-100cm away.

Forge PC Staff3 min

How to Enable AMD Fluid Motion Frames (AFMF 2.1) on a Radeon Graphics Card

How-To

How to Enable AMD Fluid Motion Frames (AFMF 2.1) on a Radeon Graphics Card

To enable AMD Fluid Motion Frames, install Adrenalin 25.3.1 or newer, then select the HYPR-RX profile (RX 7000 and newer) or turn on AMD Fluid Motion Frames under Gaming > Graphics, globally or per game. AFMF 2.1 works on RX 6000 cards and newer in DirectX 11, DirectX 12, Vulkan and OpenGL games, with VSync off; RX 6000 cards need exclusive full screen.

Forge PC Staff2 min

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

How-To

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

Microsoft says System Protection isn't on by default. Search for Create a restore point, select your C: drive, choose Configure and turn it on, then create a restore point before installing drivers or tools. To roll back, run rstrui.exe, or use Troubleshoot > Advanced options > System Restore in Windows RE. Personal files aren't affected, but it isn't a backup.

Forge PC Staff3 min

How to Use Live Captions and Translation in Windows 11

How-To

How to Use Live Captions and Translation in Windows 11

Press Windows + Ctrl + L to turn on live captions in Windows 11 22H2 or later, download the language files, then dock or float the captions and pick a style. Captions are generated on the device and work offline. On a Copilot+ PC with 24H2 or later, live captions can translate from over 40 languages into English and 27 into Chinese (Simplified).

Forge PC Staff3 min