Skip to content

VersusOS

Sleep vs Hibernate vs Shut Down in Windows 11: Which Should You Use on a Gaming PC?

Sleep keeps your session in RAM for the fastest resume but loses unsaved work in a power cut. Hibernate writes it to hiberfil.sys on your SSD and uses no power, but resumes more slowly. Shut down or restart for a clean start. On a gaming desktop, sleep for short breaks and hibernate for long ones; on a laptop, hibernate or shut down before travelling.

By , Editorial team

5 min read

Sleep vs Hibernate vs Shut Down in Windows 11: Which Should You Use on a Gaming PC?

When you walk away from your PC, Windows 11 gives you three main choices: sleep, hibernate or shut down. They differ in how quickly you get back to work, how much power they use, and what happens if the power goes off. This guide explains each one using Microsoft's own documentation and suggests which to use on a gaming desktop and a laptop. Forge PC hasn't measured power use or resume times on specific PCs, and the exact behaviour depends on your hardware and firmware, so use the commands below to check what your own PC supports.

The short version

Sleep

Hibernate

Shut down

Where your session goes

Kept in RAM

Saved to a file on the system drive

Closed

Power while off

Very little

None, apart from a trickle current

Off

Resume speed

Fastest

Slower than sleep

Full startup

Survives power loss

No

Yes

Nothing to lose

Best for

Short breaks

Long breaks on a laptop, or keeping open work overnight

Updates, hardware changes, troubleshooting

What sleep does

Microsoft says sleep uses very little power, your PC starts up faster, and you're instantly back where you left off. It suggests using sleep when you'll be away for a little while, "like when you're taking a coffee break".

On traditional PCs, sleep usually means the ACPI S3 state. Microsoft's driver documentation describes S3 as a state where the processor is off and only system memory is retained; the rest of the hardware context is lost and restored on wake. The catch is that RAM needs power to keep its contents: if a PC in S1, S2 or S3 loses all AC or battery power, Microsoft says it loses its state and must reboot. On a desktop, that means a power cut while it's asleep loses any unsaved work.

For laptops, Microsoft adds that Windows automatically saves your work and turns the PC off if the battery gets too low while it's asleep.

What Modern Standby changes

Many newer PCs, especially laptops, don't use S3 at all. They use Modern Standby, which Microsoft describes as an instant on/instant off experience similar to a smartphone, where the system can stay connected to the network in a low-power mode and wake briefly to do background work. Microsoft says switching between S3 and Modern Standby can't be done with a BIOS setting; changing the power model requires a complete reinstall of Windows.

Microsoft also notes that some PCs, for example those with InstantGo, don't offer the hibernate option at all.

To see which sleep states your PC supports, open Terminal (Admin) and run:

powercfg /availablesleepstates

Microsoft's documentation says this reports the sleep states available on the system and attempts to explain why any are unavailable.

What hibernate does

Hibernate is ACPI state S4. Microsoft's documentation says the PC writes an image of memory to a hibernate file on disk, then powers off all devices. When you start it again, Windows reads that file and returns you to where you left off. In hibernate, Microsoft says the computer uses no power, with the possible exception of trickle current, and it can resume even after losing AC or battery power, because the session is saved on the drive.

Microsoft's support page says hibernate uses less power than sleep and returns you to where you left off, "though not as fast as sleep", and recommends it when you won't use a laptop or tablet for an extended period and can't charge it.

The hibernate file is hiberfil.sys, a hidden system file in the root of the Windows drive. Microsoft says its size is approximately equal to the amount of RAM installed, so on a 32GB gaming PC, expect a file of about that size. If disk space is tight, our free up disk space guide covers other ways to reclaim space.

One more Microsoft caution: avoid changing hardware while a PC is hibernated, because reconfiguring hardware in S4 might stop the hibernate file loading correctly.

What shut down does (and Fast Startup)

A full shutdown (state S5) closes your apps and session, so the next boot starts fresh. Windows' Fast Startup feature is linked to hibernation: Microsoft's powercfg documentation says a "reduced" hibernate file only supports hiberboot, the boot mode Fast Startup uses. Our Fast Startup guide explains how it affects shutdown and when to turn it off.

How to turn hibernate on

Hibernate is often hidden. Microsoft's instructions:

  1. Open Terminal (Admin) or Command Prompt as administrator.

  2. Run powercfg /hibernate on. This makes hibernation available. (Use powercfg /hibernate off to disable it and remove the file.)

  3. To add it to the power menu, open Power Options in Control Panel, choose Choose what the power buttons do, select Change settings that are currently unavailable, tick Hibernate under Shutdown settings, and save.

Microsoft warns that if you make hibernation unavailable while hybrid sleep is turned on, hybrid sleep stops working, and you may lose data if a power loss occurs.

Troubleshooting sleep and wake problems

If your PC wakes up on its own, these built-in commands, documented by Microsoft, help you find out why:

  • powercfg /lastwake reports what woke the PC from its last sleep.

  • powercfg /waketimers lists active wake timers, which can wake the PC from sleep and hibernate.

  • powercfg /requests lists apps and drivers currently preventing sleep.

If a monitor, printer or other device doesn't work properly after waking, Microsoft suggests disconnecting and reconnecting it or restarting, and making sure you have current drivers. Our Wake-on-LAN guide explains network wake settings, and Reliability Monitor can show if crashes follow a resume.

Security: sleep vs hibernate on a laptop

A sleeping laptop keeps your session in memory, ready to unlock at the lock screen. Our recent report on the FastUnlock lock screen bypass is a reminder that the lock screen isn't a perfect barrier for a device someone can physically get at. Hibernating or shutting down a laptop before travelling means it isn't sitting at the lock screen with your session held in memory. Keep your BitLocker recovery key somewhere safe.

Which should you use?

Gaming desktop: sleep is fine for short breaks and overnight if you have a reliable power supply and don't mind it occasionally waking. Use hibernate if you want to leave games or work open without using power, or if power cuts are a risk. Shut down or restart after updates, driver installs and hardware changes. You can also change what your PC does when idle in the power settings; see our power mode guide.

Laptop: sleep for short breaks, hibernate (or shut down) when you won't use it for hours or are putting it in a bag.

Our verdict

Sleep is the fastest way back to your desktop but keeps your session in RAM, so a power cut loses unsaved work. Hibernate saves everything to a hiberfil.sys file about the size of your RAM and uses no power, at the cost of a slower resume. Shut down, or better, restart, when you need a clean start. On a gaming desktop, sleep for short breaks and hibernate for long ones is a sensible default; on a laptop, hibernate or shut down before you travel.

The bottom line

Sleep is the fastest way back to your desktop but keeps your session in RAM, so a power cut loses unsaved work. Hibernate saves everything to a hiberfil.sys file about the size of your RAM and uses no power, at the cost of a slower resume. Shut down, or better, restart, when you need a clean start. On a gaming desktop, sleep for short breaks and hibernate for long ones is a sensible default; on a laptop, hibernate or shut down before you travel.

Sources

  1. 01Microsoft Support, Shut down, sleep, or hibernate your PC
  2. 02Microsoft Learn, System Sleeping States
  3. 03Microsoft Learn, Modern Standby
  4. 04Microsoft Learn, How to disable and re-enable hibernation
  5. 05Microsoft Learn, Powercfg command-line options

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

Lemonade vs Ollama: Which Local AI Server Should You Use on an AMD or NVIDIA PC?

Versus

Lemonade vs Ollama: Which Local AI Server Should You Use on an AMD or NVIDIA PC?

Ollama is the safest default for local LLMs, with a big model library and support for NVIDIA, AMD and Apple hardware. Lemonade, an open-source server with AMD-backed optimisations, is the better choice on Ryzen AI and Radeon PCs if you want NPU support or speech and image models alongside LLMs. It also speaks the Ollama and OpenAI APIs.

Forge PC Staff5 min

How to Add Web Search to Your Local AI Chatbot in Open WebUI

How-To

How to Add Web Search to Your Local AI Chatbot in Open WebUI

Open WebUI can give a local model live web search. Start with the built-in DDGS engine, which needs no API key, move to a self-hosted SearXNG instance (with JSON output enabled) for more control, or use a hosted search API. Raise the model's context length to at least 16K tokens and use a model with good tool calling for useful answers.

Forge PC Staff5 min

How to Use Your Android Phone as a Webcam in Windows 11 (No Extra Apps)

How-To

How to Use Your Android Phone as a Webcam in Windows 11 (No Extra Apps)

Windows 11 can use a linked Android 10 or newer phone as a wireless webcam with no extra apps. Link the phone in Settings > Bluetooth & devices > Mobile devices, turn on 'Use as connected camera', then choose the phone in Teams, Discord or OBS and approve the prompt on the phone. It's a handy stopgap, though a dedicated webcam is less hassle daily.

Forge PC Staff4 min

How to Completely Uninstall ASUS Armoury Crate (and Stop It Reinstalling)

How-To

How to Completely Uninstall ASUS Armoury Crate (and Stop It Reinstalling)

Removing Armoury Crate from Settings leaves services behind. Use ASUS's Armoury Crate Uninstall Tool from your board's Driver & Utility page, restart and run it again if it reports a failure. Then disable 'Download & Install ARMOURY CRATE app' in the BIOS Tool menu so you're not prompted to reinstall it, and set fan curves in the BIOS instead.

Forge PC Staff4 min