Skip to content

VersusKeyboard

PBT vs ABS Keycaps: Which Keycap Plastic Is Better for Your Keyboard?

PBT keycaps are harder, resist shine and feel textured, while ABS keycaps are cheaper, take brighter colours and let RGB through more easily but get shiny with use. Legend type matters too: double-shot legends last longest on either plastic, dye-sub is PBT-only and not backlit, and a well-made ABS set can beat cheap PBT.

By , Editorial team

3 min read

PBT vs ABS Keycaps: Which Keycap Plastic Is Better for Your Keyboard?

Look at any mechanical keyboard listing and you'll see the keycaps described as ABS or PBT. They're the two most common keycap plastics, and they feel and age differently. The short answer is that PBT usually lasts better, but the way the letters (legends) are made matters just as much, and a good ABS set can beat a poor PBT one.

This comparison draws on keycap guidance from HyperX, Wooting and Kinetic Labs. Forge PC hasn't tested specific keycap sets, so there are no wear tests here.

Quick comparison

ABS

PBT

Surface over time

Becomes shiny and slick with use

Much more resistant to shine

Feel

Smooth

Textured, matte

Sound

HyperX: can sound "softer"; Wooting: higher-pitched

Deeper, often described as "crisp"

RGB shine-through

Bright

Doesn't shine through as easily

Colours

Easier to make vivid colours

Harder to get bright colours

Manufacturing

Easier, more consistent

Harder to control

Price

Usually cheaper

Generally more expensive

ABS: cheaper, brighter and better for RGB, but it shines

ABS (acrylonitrile butadiene styrene) is the most common keycap material, according to HyperX. It's easier to mould consistently, it takes vivid colours well, and it lets keyboard lighting shine through brightly, which is why so many RGB keyboards use it.

The downside is wear. HyperX says ABS surfaces become shiny, slick and reflective over time, printed legends may fade, and keycaps can be brittle where they attach to the switch. Kinetic Labs adds that ABS yellows faster than PBT under UV light, which is why many old beige keyboards look tinted.

Quality varies, though. Wooting points out that GMK, a well-known premium keycap maker, uses only ABS, and its sets are expensive and in high demand.

PBT: tougher and less shiny, with a duller look

PBT (polybutylene terephthalate) is harder and more wear-resistant, according to HyperX. Even if its textured surface smooths a little over time, it won't shine nearly as quickly as ABS. It's also resistant to solvents and chemicals. PBT keycaps are typically thicker, which gives a deeper, crisper sound that some people love and others find loud.

The trade-offs are a duller look, less vivid colours, weaker light shine-through and a higher price. Wooting adds two useful caveats: PBT keycaps are rarely 100% PBT (it's often mixed with other materials), and a manufacturer can make poor PBT keycaps just as it can make great ABS ones. Kinetic Labs notes that some PBT sets use ABS for the largest keys, such as the space bar, because ABS shrinks less during moulding.

The legends matter as much as the plastic

How the letters are made often decides how long a keyboard looks new:

  • Double-shot: the legend and keycap are moulded from two separate shots of plastic. Wooting says this always gives the longest-lasting legends and is used with both ABS and PBT. If the legend plastic is translucent, it works with backlighting.

  • Dye-sublimation: the legend is dyed into the plastic using heat. Wooting says this is used on PBT because ABS can't withstand the heat. It doesn't support backlighting.

  • Painted and laser-etched: common on ABS backlit keyboards. HyperX says printed or etched legends on ABS can fade over time.

So "double-shot PBT" is the safest choice for long-lasting keycaps with RGB, while "dye-sub PBT" suits non-backlit boards.

Which should you choose?

Choose PBT if: you type a lot, hate shiny keys, or want a deeper sound. Double-shot PBT keeps legends readable and works with lighting.

Choose ABS if: you want the brightest RGB, vivid colours or a smoother feel, or you're on a budget. Double-shot ABS still avoids worn-off legends.

Keycaps can be replaced later on many mechanical keyboards, so the switches and build often matter more when you buy. See our best gaming keyboards, linear vs tactile vs clicky switches and hot-swappable vs soldered keyboards.

Our verdict

PBT keycaps are usually the better long-term choice: they're harder, resist shine and have a textured, matte feel, though they cost more and don't show off RGB as well. ABS is cheaper, more colourful and better for lighting, but it gets shiny with use. Check the legend type too: double-shot legends last longest on either plastic, and a well-made ABS set can still beat cheap PBT.

The bottom line

PBT keycaps are usually the better long-term choice: they're harder, resist shine and have a textured, matte feel, though they cost more and don't show off RGB as well. ABS is cheaper, more colourful and better for lighting, but it gets shiny with use. Check the legend type too: double-shot legends last longest on either plastic, and a well-made ABS set can still beat cheap PBT.

Sources

  1. 01HyperX Support Center, ABS Keycaps vs HyperX PBT Keycaps
  2. 02Wooting, ABS vs PBT - What are the best keycaps?
  3. 03Kinetic Labs, Should I buy ABS vs. PBT Keycaps?

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

Hot-Swappable vs Soldered Keyboards: Is Hot-Swap Worth Paying For?

Versus

Hot-Swappable vs Soldered Keyboards: Is Hot-Swap Worth Paying For?

A hot-swappable keyboard has sockets, so you can pull a switch and push in a new one without soldering; on a soldered board, changing switches means desoldering. Hot-swap only helps with compatible switches: check MX-style vs low-profile, optical or magnetic, and whether the PCB accepts 5-pin switches. Worth it if you might change switches.

Forge PC Staff3 min

Membrane vs Mechanical Keyboard: Which Should You Buy for Gaming and Work?

Versus

Membrane vs Mechanical Keyboard: Which Should You Buy for Gaming and Work?

Mechanical keyboards use a switch under every key, giving clearer feedback, switches rated for up to 50-100 million keystrokes (per Logitech) and easy keycap swaps. Membrane keyboards use rubber domes, so they're softer, quieter, cheaper and more spill-resistant, but the domes can wear. Buy mechanical for heavy gaming and typing, membrane for quiet spaces and tight budgets.

Forge PC Staff3 min

Full-Size vs TKL vs 75% Keyboard: Which Size Is Best for Gaming?

Versus

Full-Size vs TKL vs 75% Keyboard: Which Size Is Best for Gaming?

Full-size keyboards have 104-108 keys including the number pad, tenkeyless (TKL) boards drop the number pad for 87-88 keys, 75% boards pack the TKL keys tighter into 81-84, and 65% boards drop the function row. For most gamers TKL is the best balance; UK buyers should check for an ISO layout.

Forge PC Staff3 min

Linear vs Tactile vs Clicky Keyboard Switches: Which Is Best for Gaming and Typing?

Versus

Linear vs Tactile vs Clicky Keyboard Switches: Which Is Best for Gaming and Typing?

Linear switches such as Cherry's MX2A Red (45cN) are smooth and light, tactile switches such as the Brown (55cN) add a bump you can feel, and clicky switches such as the Blue (60cN) add an audible click. Cherry rates the Red and Brown for over 100 million keystrokes and the Blue for over 50 million. Linear suits gaming, tactile suits mixed use, and clicky is best avoided on voice chat. Forge PC ha

Forge PC Staff3 min