Many recent motherboards, NAS boxes and Wi-Fi 7 routers have 2.5 Gigabit Ethernet (2.5GbE) ports. If they all plug into an old gigabit switch, every link drops to 1Gbps. A 2.5GbE switch fixes that, and the simplest ones are plug-and-play with no setup at all. These picks are based on manufacturers' published specifications. Forge PC hasn't tested network speeds for this guide, and we don't quote prices because switch prices change often around Black Friday.
Quick picks
Pick | Model | Ports | Switching capacity | Cooling |
|---|
Best 5-port | TP-Link TL-SG105-M2 | 5 x 2.5GbE | 25Gbps | Fanless |
Best 8-port | TP-Link TL-SG108-M2 | 8 x 2.5GbE | 40Gbps | Fanless |
Alternative 5-port | NETGEAR MS305 | 5 x 2.5GbE | (not listed in our source) | Fanless |
Best 5-port: TP-Link TL-SG105-M2
TP-Link's TL-SG105-M2 has five ports that each run at 2.5Gbps, 1Gbps or 100Mbps, with auto-negotiation so older devices still connect. TP-Link's UK spec sheet lists:
25Gbps switching capacity and an 18.6Mpps packet forwarding rate
16K MAC address table and 10KB jumbo frames
802.3bz (the 2.5GBASE-T standard) and 802.1p traffic prioritisation
Fanless metal case, 209 x 126 x 26mm, for desk or wall mounting
Five ports suit a typical desk setup: one to the router, then your PC, a NAS and a couple of other devices.
Best 8-port: TP-Link TL-SG108-M2
The TL-SG108-M2 is the same design with eight 2.5GbE ports. TP-Link lists 40Gbps of switching capacity and a 29.8Mpps forwarding rate, with the same 16K MAC table, 10KB jumbo frames and fanless metal case (226 x 131 x 35mm). It's the one to buy if you're wiring a whole room or a small home office, or want spare ports for later.
Alternative 5-port: NETGEAR MS305
NETGEAR's MS305 is another five-port, all-2.5GbE unmanaged switch. NETGEAR's UK page says it has five 100M/1G/2.5G ports in a metal case, can sit on a desk, mount on a wall or fix under a table with the included kit, uses a fanless design, and supports Energy Efficient Ethernet (802.3az) to cut power use when ports are idle. NETGEAR's spec listings didn't load in full for us, so compare the detailed figures on its datasheet before buying.
What to check before you buy
Every port should be 2.5GbE. Some cheaper switches mix 2.5GbE and gigabit ports. All three picks here are 2.5GbE on every port.
Fanless for desks and bedrooms. All three picks are fanless, so they make no fan noise.
Unmanaged is fine for most homes. These are plug-and-play: no app, no web interface, no settings. You only need a managed switch for VLANs or detailed traffic control.
Your cables are probably fine. TP-Link says these switches run at 2.5Gbps without upgrading to Cat6 cabling. Our Cat5e vs Cat6 vs Cat8 guide explains what each cable type supports.
Your devices need 2.5GbE too. A faster switch won't speed up a PC or router that only has gigabit ports, and won't make broadband faster than your package. Our 2.5GbE vs 1GbE explainer covers when the upgrade is worth it, including PCIe cards for PCs without a 2.5GbE port.
If you're also replacing your router, see our best Wi-Fi 7 router guide: many Wi-Fi 7 routers have 2.5GbE ports.
Our verdict
For most homes, TP-Link's TL-SG105-M2 is the best 2.5GbE switch: five 2.5GbE ports, 25Gbps of switching capacity, a fanless metal case and no setup. Choose the TL-SG108-M2 if you need eight ports (40Gbps capacity), or NETGEAR's fanless MS305 as an alternative five-port switch. Before you buy, check that your PC, NAS and router actually have 2.5GbE ports; otherwise a gigabit switch is all you need.