Skip to content

How-ToPSU

How to Tell If Your Power Supply Is Failing (and How to Test It)

Signs of a failing or underpowered PSU include boot failures, sudden shutdowns or reboots under load with no error, unreliable starts and problems after a GPU upgrade. Check sockets, cables, dust and wattage, then use a jumper test, a PSU tester and ideally a known-good spare to confirm. Never open a PSU; switch off if you smell burning.

By , Editorial team

5 min read

How to Tell If Your Power Supply Is Failing (and How to Test It)

The power supply (PSU) feeds every part of your PC, so when it starts to struggle the symptoms can look like almost anything: a graphics card fault, a bad driver, or Windows playing up. This guide covers the warning signs that point to the PSU, and the tests you can do at home to confirm it.

Forge PC hasn't tested specific power supplies for this guide. The symptoms and test steps come from AMD's, Seasonic's and Corsair's support and guidance pages.

Safety first: never open a power supply. It can hold a dangerous charge even when unplugged. If you smell burning or see smoke, switch off at the wall immediately and don't use the PC until the PSU has been replaced.

Warning signs of a failing or insufficient PSU

AMD lists three main symptoms of a faulty or insufficient PSU: boot failure, random crashes, hangs or reboots, and display corruption. Seasonic adds more detail on how PSU problems tend to behave:

  • Shutdowns or reboots under load. Seasonic says a PC that runs fine on light tasks but shuts down minutes after launching a game or render suggests the PSU is hitting its limits or reacting to sudden power spikes.

  • Restarts with no error. Seasonic describes PSU-related problems as the system simply switching off or rebooting, without a blue screen or error message.

  • Problems after a GPU upgrade. Freezes, black screens or reboots under load after fitting a new graphics card can mean the PSU isn't keeping up with the card's power demands, according to Seasonic.

  • Unreliable starts. A PC that doesn't always power on first time, shuts down during boot or needs several attempts to start.

Seasonic contrasts this with graphics card faults, which more often leave visual or driver-level clues such as artefacts, driver resets and app crashes, and tend to happen consistently in the same game or scene. PSU problems, it says, can feel random.

AMD says these issues usually happen when the PSU has stopped working completely, is overheating because of dust or a broken fan, no longer outputs its rated wattage, or doesn't meet the system's power requirements.

Step 1: Rule out the easy things

Following AMD's troubleshooting steps:

  1. Try a different wall socket that you know works, and a different mains cable.

  2. Check every power connector is firmly seated, including the 24-pin, CPU and graphics card cables. For high-end cards, see our guide to connecting a 12V-2x6 cable safely; Seasonic notes that a poorly seated 12VHPWR/12V-2x6 cable or a low-quality adapter can cause instability or shutdowns.

  3. Check the PSU fan and vents. AMD suggests clearing dust from blocked vents with compressed air. Our guide to cleaning dust out of your PC explains how.

  4. Check the wattage. Compare the rated output on the PSU label with your system's needs, using a PSU calculator. Our PSU buying guide explains how to size one.

Also rule out overheating: Seasonic notes that a CPU or GPU that gets too hot will throttle or shut down to protect itself, which can look like a power problem.

Step 2: The jumper (paperclip) test

If the PC won't turn on at all, Corsair's guide explains how to check whether the PSU powers up on its own:

  1. Switch off the PSU and unplug every cable except the mains cable and the 24-pin cable (disconnect it from the motherboard).

  2. Use a PSU jumper or a bent paperclip to connect pin 16 and pin 17 on the 24-pin connector. Corsair says these are the 4th and 5th pins counting from the left, with the clip facing up and the pins facing you. Jumping the wrong pins can cause injury or damage, so check Corsair's diagram first.

  3. Switch the PSU on and see if the fan spins. Corsair notes that many of its PSUs have a zero-RPM mode where the fan only spins briefly at power-on, which is still normal.

This only tells you the PSU can switch on. It doesn't prove it delivers stable power under load.

Step 3: Use a PSU tester or multimeter

Corsair also describes using a plug-in power supply tester, which reads the main voltage rails and the PG (power good) timing. Corsair says a PG reading of 0ms indicates a failing PSU, but notes that newer ATX specifications have changed PG timing requirements, so many testers may flag an error on newer PSUs, and that ATX 3.x units without a -12V rail can show a false -12V reading. If readings are out of range, contact the PSU maker's support. A multimeter can also measure the rails if you follow the maker's pin chart.

Step 4: Swap in a known-good PSU

The most reliable test, and the one AMD recommends, is to try the PC with a known working PSU of equal or greater wattage. If the symptoms disappear, you've found the culprit. If you don't have a spare, a local repair shop can usually test it for you.

When to replace it

Replace the PSU if it fails the tests above, smells of burning, or if your system's power needs have outgrown it. Seasonic notes PSU components can age over years of use, especially in hot, high-load systems, and become less able to handle modern GPUs' short power spikes. Check its warranty first, as many PSUs have long warranties. See our best power supply guide for current picks.

If the PSU tests fine, our guides to a PC that randomly restarts or shuts down and a PC that won't turn on or boot cover other causes, and our stress-testing guide helps confirm stability once you've fixed it.

Our verdict

The classic signs of a failing or underpowered PSU are boot failures, sudden shutdowns or reboots under load with no error message, unreliable starts and problems that begin after a GPU upgrade. Check sockets, cables, dust and wattage first, then use a jumper test to see if it powers on, a PSU tester for voltages, and ideally a known-good spare PSU to confirm. Never open a PSU, and switch off immediately if you smell burning. Forge PC hasn't tested specific units; the steps follow AMD, Seasonic and Corsair.

The bottom line

The classic signs of a failing or underpowered PSU are boot failures, sudden shutdowns or reboots under load with no error message, unreliable starts and problems that begin after a GPU upgrade. Check sockets, cables, dust and wattage first, then use a jumper test to see if it powers on, a PSU tester for voltages, and ideally a known-good spare PSU to confirm. Never open a PSU, and switch off immediately if you smell burning. Forge PC hasn't tested specific units; the steps follow AMD, Seasonic and Corsair.

Sources

  1. 01AMD Support, How to Troubleshoot Power Supply Issues
  2. 02Seasonic, Why Your PC Crashes Under Load - Power Supply or GPU? How to Diagnose
  3. 03Corsair, How to Test a PSU (Power Supply Unit)

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

How to Reduce Coil Whine From Your Graphics Card or PSU

How-To

How to Reduce Coil Whine From Your Graphics Card or PSU

Coil whine is the inductors in your graphics card, PSU or motherboard vibrating under load. Intel, ASUS and NZXT say it's normal and doesn't damage hardware. Cap your frame rate at or below your refresh rate or use V-Sync, remove overclocks, check your PSU and cables, and consider a UPS with power conditioning.

Forge PC Staff4 min

Single-Rail vs Multi-Rail PSU: What the Difference Really Means for Your PC

Versus

Single-Rail vs Multi-Rail PSU: What the Difference Really Means for Your PC

Single-rail and multi-rail PSUs differ in how 12V over-current protection is split, not in total power. Single-rail shares one OCP limit across all connectors and is simplest for most gaming PCs; multi-rail gives each group its own limit, which suits workstations with several heavy loads but may need load balancing. Build quality matters more than rail design.

Forge PC Staff4 min

Best Budget Power Supply in 2026: Three PSUs Under £80 Worth Buying (UK)

Best Picks

Best Budget Power Supply in 2026: Three PSUs Under £80 Worth Buying (UK)

The be quiet! Pure Power 13 M 750W (about £73 at Scan, 17 Nov 2026) is the best budget PSU: fully modular, ATX 3.1, 80 PLUS Gold, semi-passive and 10-year warranty. The Corsair RM750e (about £80) is a compact Cybenetics Gold alternative, and the non-modular Corsair CX650 ATX 3.1 (about £55) suits mid-range builds.

Forge PC Staff4 min

SFX vs SFX-L vs ATX Power Supply: Which PSU Size Do You Need?

Versus

SFX vs SFX-L vs ATX Power Supply: Which PSU Size Do You Need?

ATX power supplies are 150 x 86mm with a depth of 140mm or more; SFX units are 125 x 63.5 x 100mm and SFX-L units are 125 x 63.5 x 130mm. Buy ATX for normal towers, SFX for compact mini-ITX cases and SFX-L only if your case supports it. An SFX unit can fit an ATX case with a bracket, but an ATX unit won't fit an SFX-only case.

Forge PC Staff4 min