Skip to content

How-ToOS

How to Record Gameplay on Your PC with OBS Studio

How to record gameplay on Windows with official OBS Studio: install from obsproject.com, add a Game Capture source, set a recording quality and a destination folder, then use Start Recording. The guide follows OBS's official Game Capture documentation and does not invent encoder settings or performance claims.

By , Editorial team

4 min read

How to Record Gameplay on Your PC with OBS Studio

You do not need a capture card to record a game that is running on the same PC. OBS Studio, the free and open-source app most people associate with Twitch and YouTube, can write a local video file just as easily as it can stream. This guide is for that local recording job on a Windows gaming PC.

Forge PC has not measured encoder quality or performance in OBS. The steps below follow OBS Studio's official documentation. If you want a second PC or a console in the shot, our capture card guide and streaming setup guide cover that path instead.

1. Download OBS from the official site

Get the Windows installer from the official OBS Studio website (obsproject.com) — only from that site, not from a bundled "game booster" download. Run the installer, then open OBS Studio. The first-run Auto-Configuration Wizard can set a baseline; you can change everything afterwards in Settings.

OBS is also a capable streaming tool, which is why it appears in our OBS Studio vs Streamlabs comparison. For this guide you can ignore streaming accounts entirely.

2. Set the canvas to match your monitor

Open Settings → Video:

  • Set Base (Canvas) Resolution to your monitor's native resolution, for example 2560x1440.

  • Set Output (Scaled) Resolution to the same value if you want a 1:1 recording, or to a lower resolution if you need a smaller file.

  • Set Common FPS Values to the frame rate you want to record, often 60. There is no benefit in recording at 120fps if the game is running at 60.

If you have just changed a monitor's refresh rate, our refresh rate guide is the place to check the display is actually running at the rate you think it is.

3. Choose a recording format and encoder

Open Settings → Output. The Simple output mode is enough for most people:

  • Under Recording, pick a path on a drive with plenty of space. A long 1440p recording will fill a small SSD quickly.

  • Set Recording Quality to one of OBS's named presets, such as Indistinguishable Quality, Large File Size if you want a clean archive, or a lower preset if you need to save disk space. We are not going to invent a bitrate: the named presets exist so you do not have to.

  • Set Recording Format to a widely supported option such as MPEG-4 (.mp4) or the Matroska (.mkv) format. MKV is safer if the recording stops unexpectedly, because a crashed MP4 file can be harder to recover. You can remux MKV to MP4 afterwards from OBS's File → Remux Recordings menu.

  • Set Encoder to a hardware option if you have one: NVIDIA NVENC on a GeForce card, AMD AMF on a Radeon, or Intel Quick Sync on an Intel GPU or CPU with integrated graphics. The software x264 encoder works on any PC but uses more CPU.

Apply the settings before you close the window.

4. Add a Game Capture source

This is the important part. OBS's documentation says Game Capture is the most efficient way to add a game on Windows, and that you should try it first. It captures the DirectX or OpenGL game directly, rather than filming the whole desktop.

  1. In the Sources dock, click + and choose Game Capture.

  2. Give it a name and click OK.

  3. Pick a mode, using OBS's own descriptions:

  4. Capture any fullscreen application if you play in exclusive fullscreen on your primary monitor. If you only have one display, alt-tabbing to OBS will stop the game rendering, so the preview will go blank until you go back to the game.

  5. Capture specific window if you play in a window or borderless window. Choose the game from the list. OBS says this mode is not for ordinary desktop windows; use Window Capture for those.

  6. Capture foreground window with hotkey if you switch games and do not want to reopen the properties each time. Set the hotkey under Settings → Hotkeys.

  7. Leave the defaults unless you have a reason to change them. Official defaults are: cursor capture on, anti-cheat compatibility hook on, SLI/Crossfire mode off, transparency off, and third-party overlays (such as Steam) off.

Add an Audio Input Capture if you want a microphone, and check Settings → Audio so the game and your voice are on the tracks you expect.

5. Record, then check the file

Click Start Recording, play for a minute, then Stop Recording. Open the file from File → Show Recordings. If the picture is black, work through OBS's Game Capture troubleshooting: try the specific-window mode, run OBS as administrator only if a particular game needs it, and turn off overlapping overlays (Discord, NVIDIA, AMD, Xbox Game Bar) that can hook the same game. OBS also publishes a longer Game Capture setup guide and a troubleshooting page if the official notes above do not fix it.

If Game Capture will not work with a title, Display Capture is the fallback, but it records the whole screen and is less efficient. Do not run two capture methods on the same game at once.

Our verdict

For local game recording on a Windows PC, install official OBS Studio, set the canvas to your monitor's resolution, pick a hardware encoder if you have one, and add a Game Capture source — OBS says it is the most efficient option and should be tried first. Use fullscreen auto-capture or a specific window, record a short test, and only then start a long session. Forge PC has not tested encoders or games in OBS; this guide follows OBS Studio's official documentation.

The bottom line

For local game recording on a Windows PC, install official OBS Studio, set the canvas to your monitor's resolution, pick a hardware encoder if you have one, and add a Game Capture source — OBS says it is the most efficient option and should be tried first. Use fullscreen auto-capture or a specific window, record a short test, and only then start a long session. Forge PC has not tested encoders or games in OBS; this guide follows OBS Studio's official documentation.

Sources

  1. 01OBS Studio, official download site
  2. 02OBS Studio Knowledge Base, Game Capture Source
  3. 03OBS Studio Knowledge Base, OBS Studio Overview

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

How-To

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

Microsoft says System Protection isn't on by default. Search for Create a restore point, select your C: drive, choose Configure and turn it on, then create a restore point before installing drivers or tools. To roll back, run rstrui.exe, or use Troubleshoot > Advanced options > System Restore in Windows RE. Personal files aren't affected, but it isn't a backup.

Forge PC Staff3 min

How to Use Live Captions and Translation in Windows 11

How-To

How to Use Live Captions and Translation in Windows 11

Press Windows + Ctrl + L to turn on live captions in Windows 11 22H2 or later, download the language files, then dock or float the captions and pick a style. Captions are generated on the device and work offline. On a Copilot+ PC with 24H2 or later, live captions can translate from over 40 languages into English and 27 into Chinese (Simplified).

Forge PC Staff3 min

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

How-To

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

Run ollama ls to list your models, ollama ps to see what's loaded, ollama stop to unload one and ollama rm to delete it. On Windows, models are stored in C:\Users\%username%\.ollama\models; to move them, quit Ollama, set an OLLAMA_MODELS user environment variable to a folder on a bigger drive and restart Ollama.

Forge PC Staff3 min

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

Best Picks

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

The best free PC benchmarks in 2026: Cinebench 2026 for CPUs, Unigine Superposition Basic or 3DMark's free Steel Nomad test for graphics cards, CrystalDiskMark for SSDs, Geekbench 7 for cross-platform scores, Geekbench AI for NPUs, Blender Benchmark for creators and OCCT for stability. Run each test twice and download only from official sites.

Forge PC Staff5 min