Sony's DualSense controller works with Windows 10 (64-bit) and Windows 11 PCs, either over a USB-C cable or wirelessly by Bluetooth. Some of the controller's features only work when it's plugged in, and you'll need to re-pair it when you switch back to your PS5. This guide follows PlayStation's and Microsoft's support pages; Forge PC hasn't tested the controller with every game.
Option 1: Connect with a USB-C cable
The simplest way is a USB cable with a Type-C connector on the controller end. Plug it into the controller and a USB port on your PC.
PlayStation says a wired connection is needed on PC for some features:
Feature | On Windows PC |
|---|
Haptic feedback | Needs a USB connection, and the game must support it |
Adaptive triggers | When the game supports it |
Headset jack | Needs a wired connection |
Built-in microphone and speaker | When the game supports it |
If Windows doesn't recognise the controller over USB, try another port and cable, and see how to fix a USB device not recognised in Windows 11.
Option 2: Pair with Bluetooth
Your PC needs Bluetooth. Microsoft says most Windows devices have it built in, and if yours doesn't, a USB Bluetooth adapter adds it.
Put the controller in pairing mode (PlayStation's steps):
Make sure the player indicator on the controller is off. If it's on, hold the PS button until it turns off. Disconnect any USB cable.
Press and hold the Create button, then press and hold the PS button at the same time until the light bar blinks.
Pair it in Windows 11 (Microsoft's steps):
Select Start > Settings > Bluetooth & devices and make sure Bluetooth is On.
Select the Network, Sound or Battery icon next to the clock, select the Manage Bluetooth devices arrow on the Bluetooth quick setting, then select the controller under New devices.
PlayStation says that when pairing is complete, the light bar blinks and then the player indicator lights up.
If Bluetooth won't turn on or the controller doesn't appear, see how to fix Bluetooth not working in Windows 11.
Switching between your PC and PS5
PlayStation says each time you change devices, you must pair the controller with the new device. To reconnect to your PS5, plug the controller into the console with a USB cable and press the PS button; you can then unplug it and play wirelessly.
To avoid re-pairing, use the controller's pairing slots. PlayStation says a DualSense can store up to four pairings:
Slot | Buttons to hold (with PS button) | Player indicator |
|---|
1 | Triangle | One light |
2 | Circle | Two lights |
3 | Cross | Three lights |
4 | Square | Four lights |
To pair to a specific slot, disconnect any cable, make sure the light bar and player indicator are off, then hold the slot's button and the PS button for more than five seconds until the light bar and indicator flash twice, and pair from Windows as above. To switch devices later, hold that slot's button and the PS button for about three seconds. If all four slots are in use, the one you haven't used for the longest is replaced.
Check game support
PlayStation says controller support may vary depending on the game. It says games that support generic controllers will work, and on Steam you can check the Controller Support information on the right of a game's store page, which says whether it has full or partial support.
You can also use the controller with PS Remote Play to play games streamed from your PS5 or PS4 to your PC. For streaming PC games to another screen, see how to stream games with Sunshine and Moonlight.
Update the controller and fix problems
PlayStation says you can update the DualSense's software on a PC using its PlayStation Accessories app. If the controller still won't connect properly after following these steps, PlayStation suggests resetting it, and then contacting PlayStation Repairs if problems continue.
Wired or wireless?
Use the cable for haptic feedback and the headset jack, which PlayStation says need a wired connection on PC. Bluetooth is more convenient for everything else. Our Bluetooth vs 2.4GHz wireless explainer covers the trade-offs, and our best PC controllers guide covers alternatives.
Our verdict
Plug the DualSense in with a USB-C cable for the easiest setup and full haptics, or hold Create and PS until the light bar blinks and pair it under Settings > Bluetooth & devices. Use the pairing slots to switch between your PC and PS5, check Steam's Controller Support listing before you buy a game, and update the controller with PlayStation Accessories.