"USB device not recognised" can mean anything from a loose cable to a driver problem. The good news is that most causes can be ruled out in a few minutes, starting with the simplest.
Forge PC hasn't tested every device or motherboard. The checks below follow Microsoft's "Fix USB-C problems in Windows" support guidance, which also covers Device Manager error codes, plus standard troubleshooting steps for desktop PCs.
1. Rule out the cable and port
Try another port. Move the device to a different USB port, ideally one on the rear I/O panel, which connects directly to the motherboard, rather than a front-panel port or hub.
Try another cable. Cables fail more often than devices. Microsoft's guide suggests trying a different cable for some connection problems, and notes that not every USB-C cable supports every Alternate Mode, such as DisplayPort or Thunderbolt.
Check the port is clean. Microsoft notes that dust or dirt inside a USB port can stop a connector being inserted properly.
Try the device on another PC. If it fails everywhere, the device itself is the likely problem.
2. Remove hubs and check power
Unpowered hubs, monitor USB ports and keyboard pass-through ports can't always supply enough power for drives, webcams or audio interfaces. Plug the device straight into the PC. Microsoft's guide also notes that USB-C connectors have larger power limits, and that the PC, charger and cable must all support the right standards for the fastest charging.
3. Restart and update Windows
Restart the PC with the device unplugged, then connect it again. Next, open Settings > Windows Update and select Check for updates. Microsoft points to Windows Update to check for the latest Windows updates and device drivers.
4. Check Device Manager for an error code
Microsoft's guide explains how to find the specific error for a device that isn't working:
Right-click Start and select Device Manager.
Find the device. Microsoft says it should be marked with a yellow exclamation mark. Check under Universal Serial Bus controllers, and also categories such as Disk drives, Human Interface Devices or Sound.
Right-click it, select Properties, and read the error code under Device status.
Microsoft's guide links to its list of Device Manager error codes, which explains each code. A common next step is to right-click the device, select Uninstall device, unplug it, restart and plug it back in so Windows reinstalls the driver.
5. Install the right drivers
Chipset and USB controller drivers. On a desktop, USB controllers are part of the motherboard. Install the latest chipset package from AMD, Intel or your motherboard's support page; our chipset driver guide shows how.
Device software. Some headsets, audio interfaces and capture cards need the manufacturer's driver or app before they work fully.
6. Check the BIOS
If a whole group of ports stops working, check the motherboard's BIOS hasn't disabled them, and consider a BIOS update if your board maker lists USB fixes. Follow our safe BIOS update guide and, if settings are muddled, clear CMOS to restore defaults.
Specific devices
Our verdict
Most "USB device not recognised" errors are fixed by trying another rear port and cable, plugging directly into the PC rather than a hub, and restarting. If that fails, check Windows Update, read the error code under Device status in Device Manager as Microsoft describes, reinstall the device, and update your chipset drivers. If a device fails on every PC, it is probably faulty. Forge PC hasn't tested every device; these steps follow Microsoft's USB troubleshooting guidance.