The Logitech G Pro X Superlight 2 and Razer DeathAdder V3 Pro are both lightweight wireless mice aimed at competitive players. On paper they're closer than you'd think, so the choice mostly comes down to shape and how you'd get to 8,000Hz polling. This comparison uses Logitech's and Razer's UK product pages; Forge PC hasn't tested either mouse, and shape preference is personal, so try both in a shop if you can.
Specs compared
Spec (manufacturer) | Logitech G Pro X Superlight 2 | Razer DeathAdder V3 Pro |
|---|
Weight | 60g | 64g |
Sensor | HERO 2 | Focus Pro 30K optical |
Maximum DPI | 44,000 | 30,000 |
Maximum tracking speed | 888+ IPS | 750 IPS |
Maximum acceleration | Not listed on the page we used | 70G |
Switches | LIGHTFORCE hybrid optical-mechanical, rated for 70 million clicks | Gen-3 optical, rated for 90 million clicks |
Wireless | LIGHTSPEED, up to 8kHz polling | 8,000Hz with the HyperPolling Wireless Dongle, sold separately |
Battery | Not listed on the page we used | Up to 90 hours |
Shape | Designed with pro players | Ergonomic, mid-to-large |
Weight and shape
At 60g and 64g, both are very light for wireless mice, and a 4g difference is hard to notice in hand. Shape matters more. Razer describes the DeathAdder V3 Pro as an ergonomic esports mouse and a mid-to-large sized mouse, so it suits people who want a sculpted shape to rest their hand on. Logitech says the Superlight 2 was designed in collaboration with pro gamers but doesn't call it ergonomic. Our guide to wired vs wireless gaming mice covers the wider trade-offs.
Sensor and switches
Both sensors' maximum DPI is far beyond typical in-game settings, and the specs are close enough that neither has a meaningful sensor advantage on paper. The switch approach differs: Logitech uses hybrid optical-mechanical LIGHTFORCE switches, while Razer uses fully optical switches and says its third generation has no unintended double-clicks. See optical vs mechanical mouse switches for what that means in practice.
Polling rate
Logitech says the Superlight 2 supports up to 8kHz polling over LIGHTSPEED wireless. Razer's page says you need its HyperPolling Wireless Dongle, sold separately, for true 8,000Hz polling on the DeathAdder V3 Pro. It isn't a must-have; our guide to changing mouse polling rate explains the trade-off.
Software
Logitech uses G HUB and Razer uses Synapse for DPI, polling and button settings. If you'd rather not run either, our guide to the best free keyboard and mouse remapping software covers alternatives, and how to turn off mouse acceleration in Windows 11 is worth doing whichever you buy.
Which should you buy?
Choose the Logitech G Pro X Superlight 2 if you want the lighter option, don't want an ergonomic shape, or want 8kHz polling without buying an extra dongle.
Choose the Razer DeathAdder V3 Pro if you want an ergonomic, mid-to-large shape and want Razer's longer battery rating and higher-rated switches.
For more options, see the best gaming mice and the best mouse pads.
Our verdict
On specs these two are close, so buy on shape. The Superlight 2 is lighter and reaches 8kHz out of the box; the DeathAdder V3 Pro is the better pick if you want an ergonomic shell, with a 90-hour battery rating.