You've fitted a new M.2 or SATA SSD, booted up, and it isn't in File Explorer. Don't panic: in most cases the drive is fine and Windows simply hasn't been told to use it yet. Microsoft says it plainly: when you add a new disk, it "isn't immediately available in Windows File Explorer" until you initialise it, and you may also need to format it and give it a drive letter.
Forge PC hasn't tested every drive and board combination. This guide is based on Microsoft's Disk Management documentation and Solidigm's SSD initialisation guide, as checked on 17 November 2026. Work through the steps in order, because they go from the most common cause to the least.
Warning: initialising or formatting a disk erases it. Only do this on a new, empty drive. If the SSD came out of another PC and has files on it, skip to the section on drives that already hold data.
Step 1: Check Disk Management
Right-click the Start button and choose Disk Management (or search for "Create and format hard disk partitions"). Look at the list of disks in the lower half of the window.
"Not Initialized": this is the normal state for a new drive. Go to step 2. If it says Offline, right-click it and choose Online first, as Microsoft advises.
"Unallocated" space: the disk is initialised but has no partition. Go to step 3.
A partition with no drive letter: go to step 4.
The drive isn't listed at all: go to step 5.
Step 2: Initialise the disk
Right-click the disk's label on the left (for example "Disk 1") and choose Initialize Disk. Check you've picked the right disk, then choose a partition style. Microsoft's default is GPT, and Solidigm describes GPT as the newer style and MBR as legacy, so choose GPT unless you have a specific reason not to. Solidigm adds one exception: if you plan to clone an existing drive onto the new SSD, match the partition style of the old drive.
Right-click the unallocated space and choose New Simple Volume. Accept the default size to use the whole drive, pick a drive letter, and choose NTFS as the file system, which Microsoft and Solidigm both describe as the usual choice for Windows. Give it a label such as "Games" and finish the wizard. The drive should now appear in File Explorer.
Step 4: Assign a missing drive letter
If the partition exists but has no letter, right-click it and choose Change Drive Letter and Paths, then Add, and pick a letter. Microsoft notes that if the option is missing or greyed out, the volume isn't ready: it may be unallocated and need formatting, or you may lack administrator rights. Don't change the letter of the drive that holds Windows or your apps.
Step 5: If the SSD isn't in Disk Management at all
Now the problem is likely hardware or firmware settings, not Windows.
Check the BIOS. Restart into your motherboard's UEFI setup (usually Delete or F2 at power-on) and look for the drive in the storage or NVMe section. If it's listed there, Windows should be able to see it once drivers are in place.
Reseat the drive. Power off, switch off at the wall and unplug the PC. Check the M.2 drive is fully inserted at an angle and secured with its screw or latch. Our M.2 SSD installation guide shows how.
Check slot sharing. On many motherboards, some M.2 slots share bandwidth with SATA ports or other slots, or support only certain drive types. Your board's manual lists which slots support PCIe NVMe or SATA M.2 drives and what is disabled when they're used.
For SATA SSDs, swap the cable and port. Microsoft notes that cables "fail often", so try a different SATA data cable and power connector.
Rescan. In Disk Management, choose Action > Rescan Disks, or restart the PC.
Update the BIOS if the drive is very new and your board's firmware is old. Follow our safe BIOS update guide.
Solidigm notes that NVMe drives need an NVMe driver, and that Windows 8.1 and later include one, so a normal Windows 11 installation doesn't need anything extra for the drive to appear. If you're installing Windows onto the new drive and Setup can't see it, see our Windows 11 install guide, which covers loading storage drivers during setup.
If the drive already has data on it
If a drive from another PC shows as Offline, right-click it and choose Online. Microsoft's troubleshooting guide also covers dynamic disks that show as Foreign, which you can bring in with Import Foreign Disks. Don't initialise a drive with data you want to keep: that erases it. If a drive regularly drops out or shows errors, Microsoft notes that the most common reason a disk goes missing or fails to initialise is that it's failing, so back up what you can and check its health.
Our verdict
A new SSD that isn't in File Explorer usually just needs setting up: open Disk Management, initialise it as GPT, create a New Simple Volume formatted as NTFS, and give it a drive letter. If it's missing from Disk Management, check the BIOS, reseat the drive, read the motherboard manual for M.2 slot sharing, and update the BIOS. Never initialise a drive that holds data you need. Forge PC hasn't tested every drive and board combination.