Every desktop motherboard has a small coin-cell battery that keeps the BIOS settings and the real-time clock going while the PC is switched off at the wall. When it runs flat, your PC starts forgetting things: the date and time, your boot order, XMP or EXPO memory profiles. Replacing it is usually a quick job. This guide is based on Dell's, ASUS's and Puget Systems' official support material; Forge PC hasn't tested specific batteries.
Signs your CMOS battery is flat
Dell lists the most common symptoms of CMOS battery failure as:
an incorrect or slow system date and time in the BIOS
BIOS settings lost when the computer is powered off
a "time-of-day clock stopped" error message
You may be prompted to set the date and time every time you power on, and Dell notes that losing BIOS settings can sometimes stop the operating system loading. ASUS lists a CMOS Battery Low error at start-up as another sign. Puget Systems' troubleshooter has a useful test: if the clock resets to exactly the same date and time each time (often months or years out of date), the battery is most likely depleted. If the clock just drifts a little, it's probably something else.
How long do they last?
Dell says CMOS battery life varies with usage and environment, usually around two to three years. ASUS estimates about three years for its NUC mini PCs when they aren't plugged in, and says standby current from the power supply extends battery life while the computer is plugged in.
Which battery do you need?
Dell says its desktops use a CR2032, a 3V lithium coin cell, and tells you to replace the battery with exactly the same type, so check the markings on your old battery first. Puget Systems also says to use a standard 2032 battery. Some small PCs, including ASUS NUCs, use a CR2032 on a wire with a small connector instead of a holder, so check your manual before buying.
Step-by-step: replace the CMOS battery
Note your BIOS settings. Replacing the battery resets them, so photograph anything you've changed: boot order, XMP/EXPO, fan curves, Secure Boot. Our guide to enabling XMP or EXPO helps if you need to redo memory settings.
Shut down and unplug the PC, then press and hold the power button for 10-15 seconds to discharge it, as Dell recommends.
Ground yourself. Wear an anti-static wrist strap or touch an unpainted metal part of the case regularly.
Open the case and find the battery. It's a coin cell on the motherboard. If a graphics card is in the way, you may need to remove it first; see how to install a graphics card for the reverse steps.
Remove the old battery. Dell recommends an anti-static plastic scribe tool and warns against prying with any metal object.
Fit a brand-new battery of the same type, flat (positive, +) side up. Dell says never to fit a used battery.
Close the case, plug in and power on. Enter the BIOS, set the date and time, and restore your settings.
Dispose of the old battery properly, as Dell advises, following local rules.
If it still keeps resetting
Puget Systems says that if replacing the battery and reloading your BIOS settings doesn't fix it, it's time to contact technical support. Before that, try clearing the CMOS once with the new battery fitted, and check for a BIOS update.
Our verdict
If your PC loses its date, time or BIOS settings whenever it's unplugged, especially if the clock always resets to the same old date, replace the CMOS battery. It's usually a CR2032 coin cell (check the markings on yours). Note your BIOS settings first, unplug and ground yourself, fit a brand-new battery of the same type, then set the clock and settings again.