Skip to content

How-ToRAM

How to Check Your RAM Speed in Windows 11 (and Why CPU-Z Shows Half)

Open Task Manager > Performance > Memory and read Speed for the effective data rate. PowerShell's Win32_PhysicalMemory query shows each stick's Speed and ConfiguredClockSpeed, and CPU-Z shows timings and SPD data. CPU-Z's DRAM Frequency is the real clock, half the DDR figure. If the speed is below the box rating, enable XMP or EXPO.

By , Editorial team

3 min read

How to Check Your RAM Speed in Windows 11 (and Why CPU-Z Shows Half)

You paid for a DDR5-6000 kit, but is it actually running at 6000? It's one of the most common questions after a new build or upgrade. Many kits run below their rated speed until you enable a profile in the BIOS. This guide shows three ways to check your RAM speed in Windows 11 and explains why the tools don't always show the same number.

This is a software guide based on Microsoft's documentation, CPUID's CPU-Z documentation and memory makers' published specifications. Forge PC hasn't tested specific kits for this article.

Method 1: Task Manager (quickest)

  1. Press Ctrl + Shift + Esc to open Task Manager.

  2. Select Performance, then Memory.

  3. Look at Speed in the panel below the graph. You'll also see how many slots are used and the total installed memory.

Task Manager shows the effective data rate, which is the number you'd expect from the box, such as 6000 for a DDR5-6000 kit. Depending on your version of Windows, it may label this as MHz or MT/s.

Method 2: PowerShell (shows rated and configured speed)

Windows exposes memory details through the Win32_PhysicalMemory class. Microsoft's documentation lists both a Speed property and a ConfiguredClockSpeed property for each memory module.

  1. Right-click Start and choose Terminal.

  2. Run:

Get-CimInstance Win32_PhysicalMemory | Select-Object Manufacturer, PartNumber, Capacity, Speed, ConfiguredClockSpeed

You'll get one line per stick. Microsoft describes ConfiguredClockSpeed as the configured clock speed of the memory device, taken from the system's SMBIOS data, while Speed comes from the module's own SMBIOS speed field. If ConfiguredClockSpeed is lower than Speed, or clearly below your kit's advertised speed, the memory isn't running at its rated setting and a profile probably isn't enabled. The PartNumber column also helps you find the kit's spec page.

Method 3: CPU-Z (most detail)

CPUID's free CPU-Z tool reports memory type, size, timings and module specifications (SPD), plus a real-time memory frequency.

  1. Download CPU-Z from CPUID's website and run it.

  2. Open the Memory tab. DRAM Frequency shows the current clock, and the timings appear below it.

  3. Open the SPD tab and pick each slot to see the module's part number and the profiles stored on it.

Why CPU-Z shows half the speed

If CPU-Z shows about 3000MHz for a DDR5-6000 kit, nothing is wrong. DDR stands for double data rate: memory transfers data twice per clock cycle. As How-To Geek explains, Task Manager reports the doubled, effective rate, while CPU-Z shows the actual clock frequency. Double the CPU-Z figure to compare it with the box.

If your RAM is slower than advertised

It's common for a new kit to run at its default speed. For example, G.SKILL lists its Flare X5 48GB DDR5-6000 CL30 kit with an SPD default of 5600 MT/s at 1.10V. It only reaches 6000 MT/s with its XMP or EXPO profile enabled, which G.SKILL notes requires BIOS adjustment and depends on the motherboard and CPU.

  1. Enable XMP or EXPO. Our guide to enabling XMP and EXPO covers the main BIOS layouts.

  2. Check the slots. Two sticks normally go in the slots your motherboard manual recommends. See how to install RAM.

  3. Update the BIOS if the profile won't boot. Memory support often improves with updates. See how to update your BIOS safely.

  4. Test stability after any change with MemTest86.

If Windows shows less memory than you installed, rather than lower speed, see our guide to why usable RAM can be less than installed. For a broader look at your hardware, see how to check your PC specs.

Our verdict

Task Manager's Memory page is the quickest way to check your RAM speed in Windows 11, and it shows the effective speed you'd see on the box. PowerShell's Win32_PhysicalMemory query shows each stick's reported and configured speed side by side. CPU-Z gives the most detail, but it shows the real clock, which is half the DDR figure. If your kit is running below its rated speed, enable XMP or EXPO in the BIOS and then test for stability.

The bottom line

Task Manager's Memory page is the quickest way to check your RAM speed in Windows 11, and it shows the effective speed you'd see on the box. PowerShell's Win32_PhysicalMemory query shows each stick's reported and configured speed side by side. CPU-Z gives the most detail, but it shows the real clock, which is half the DDR figure. If your kit is running below its rated speed, enable XMP or EXPO in the BIOS and then test for stability.

In this article

Sources

  1. 01Microsoft Learn, Win32_PhysicalMemory class
  2. 02CPUID, CPU-Z
  3. 03How-To Geek, Why Is My RAM Reporting Half Its Speed?
  4. 04G.SKILL, F5-6000J3036F24GX2-FX5 specification

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

HDR10 vs HDR10+ vs Dolby Vision on PC: What Your Monitor's HDR Badge Means

Versus

HDR10 vs HDR10+ vs Dolby Vision on PC: What Your Monitor's HDR Badge Means

HDR10 uses static metadata and is the format Windows HDR is built around. HDR10+ adds royalty-free dynamic metadata, and HDR10+ Gaming certifies both monitor and GPU. Windows picks Dolby Vision automatically on certified monitors, but Microsoft warns some cap brightness in that mode. Panel brightness and contrast matter more than the badge.

Forge PC Staff3 min

How to Fix Games Crashing on PC: A Step-by-Step Checklist for Windows 11

How-To

How to Fix Games Crashing on PC: A Step-by-Step Checklist for Windows 11

Most PC game crashes come from drivers, corrupted files or unstable overclocks. Update, roll back or clean-install the graphics driver, verify the game's files, run DISM and SFC, and reset GPU and memory tuning to stock. If crashes continue, check temperatures, test RAM with MemTest86 and look at the power supply.

Forge PC Staff3 min

KoboldCpp vs LM Studio: Which Local AI App Should You Use?

Versus

KoboldCpp vs LM Studio: Which Local AI App Should You Use?

KoboldCpp is a single, install-free executable built on llama.cpp, with CUDA and Vulkan builds plus image, speech and agent features and a story-writing UI. LM Studio is a polished app that finds and downloads models for you and serves them over an OpenAI-like API. LM Studio suits most people; KoboldCpp suits tinkerers and writers.

Forge PC Staff3 min

How to Use Xbox Game Bar in Windows 11: Record Clips, Take Screenshots and More

How-To

How to Use Xbox Game Bar in Windows 11: Record Clips, Take Screenshots and More

Xbox Game Bar is built into Windows 11. Press Windows + G over a game to record clips, take screenshots, adjust volume and watch performance, or Windows + Alt + G to record a full-screen game. Find captures under See my captures, check DirectStorage support under Settings > Gaming Features, and make sure Game Mode is on.

Forge PC Staff2 min