A desktop PC does not need a datacentre battery cabinet. It does benefit from a compact uninterruptible power supply that can ignore a brief brownout, give you a minute or two to save your work, and tell Windows to shut down if the power stays off. The number that matters is the UPS's watt rating, not the VA figure on the box, and not the wattage printed on your PSU.
Forge PC has not measured runtimes, transfer times or noise on these units. The picks below use official 230V specifications from Schneider Electric (APC) and CyberPower, read on 14 November 2026. We have not lab-tested them, and we are not inventing how many minutes your particular PC will last.
How to size a UPS
Look at the watt (W) figure first. VA is apparent power; the watt rating is what you compare with the actual load of the PC, monitor and anything else you plug in. A 850W power supply does not mean the PC draws 850W at the wall. Most gaming PCs sit far below the PSU's label in everyday use, but a high-end GPU can close that gap under load: NVIDIA's GeForce RTX 5090, for example, has an official 575W TGP, which already exceeds some smaller UPS watt ratings on its own.
A practical approach:
Add a conservative estimate for the PC, a monitor and a router, then pick a UPS whose watt rating sits above that total, with some headroom.
Do not plug laser printers, heaters or a second high-power PC into the same unit.
Use the battery-backed outlets for the PC and monitor, and surge-only outlets, if the unit has them, for devices that do not need to stay on during an outage.
Install the official shutdown software (APC PowerChute or CyberPower PowerPanel, depending on the brand) so Windows can close cleanly if you are not at the desk.
The three kits below all use IEC C13 outlets, which match the C13/C14 cable already on most PC power supplies. They are 230V, line-interactive units with automatic voltage regulation (AVR), which corrects mild over- and under-voltage without switching to the battery. They will not accept a UK 13A plug from a typical lamp or phone charger unless you add a suitable IEC lead. Check the wall plug on the UPS itself, and use a UK-earthed IEC lead.
Our picks
Use | UPS | Official rating | Outlets |
|---|
Mid-range desktop | APC Back-UPS Pro 900, BR900MI | 900VA / 540W, 230V | 6x IEC C13, AVR, LCD, user-replaceable battery |
Higher-power desktop | APC Back-UPS Pro 1500, BR1500GI | 1500VA / 865W, 230V | 10x IEC C13, AVR, LCD, user-replaceable battery |
Higher watt headroom | CyberPower Value Pro VP1600EILCD | 1600VA / 960W, 230V | 8x IEC C13 (4 battery and surge, 4 surge-only), AVR, LCD |
Mid-range: APC Back-UPS Pro 900 (BR900MI)
The official Schneider Electric UK listing for the BR900MI is a 900VA, 540W, 230V tower with six IEC C13 outlets, AVR, an LCD, and a user-replaceable battery. That 540W ceiling is enough for many mid-range gaming PCs and a monitor, but it is the wrong size for a very high-power GPU build. If your graphics card's official power target is already around 575W, look at the 865W or 960W models instead. Schneider's UK product page listed this unit at £383.45 on 14 November 2026; treat that as the manufacturer's listed figure, not a shop deal, and compare current street prices.
Higher-power: APC Back-UPS Pro 1500 (BR1500GI)
The official UK model is the BR1500GI, a 1500VA, 865W, 230V tower with ten IEC C13 outlets, AVR, an LCD and a user-replaceable battery. The extra watt rating is the reason to step up: it leaves more room for a powerful GPU, a second display, or a NAS that you also want to ride through a short cut. Schneider's UK page listed it at £696.02 on 14 November 2026, again as a manufacturer figure rather than a sale price. That is a lot of money compared with a mid-range PSU, so only spend it if you actually need the headroom or the extra outlets.
Alternative: CyberPower VP1600EILCD
CyberPower's official VP1600EILCD is a 1600VA, 960W, 230V line-interactive tower with eight IEC C13 outlets, four of them battery-and-surge and four surge-only. Official extras include AVR, a typical 4ms transfer time, a 450-joule surge rating, USB and serial ports, and PowerPanel software. Two caveats are on the official sheet: the on-battery waveform is a simulated sine wave, and the product warranty is two years. Some power-supply vendors prefer a pure sine-wave UPS for active-PFC PSUs. We have not tested this combination; if your PSU manual or the UPS maker asks for a pure sine output, pick a unit that officially provides one rather than assuming this Value Pro model will do. The "EILCD" SKU is the IEC-outlet version; do not confuse it with the Schuko-outlet VP1600ELCD, which uses European sockets rather than IEC C13.
CyberPower's product page did not give us a usable official runtime figure in the specifications table we reviewed, so we are not quoting one. Runtime always depends on the load, the age of the battery and the temperature of the room.
What a UPS will not do
It will not replace a generator, and it will not run a 500W PC for hours. It is a short buffer: enough time to save, shut down, or ride out a blink. It is also not a substitute for a decent power supply or for sizing that PSU correctly with our PSU chooser. Plug the UPS into a UK wall socket with a proper earth, keep the vents clear, and replace the battery when the official software or the LCD says it is worn. Dispose of old batteries at a suitable recycling point.
Our verdict
Size a UPS by its watt rating, not by the VA on the box and not by your PSU's label. For many mid-range desktops the official 540W APC Back-UPS Pro 900 (BR900MI) is the sensible 230V IEC starting point. Step up to the 865W BR1500GI or the 960W CyberPower VP1600EILCD if you have a high-power GPU or more devices to protect. All three are line-interactive, AVR-equipped, IEC-outlet towers; the CyberPower unit uses a simulated sine wave, so check that this matches your PSU vendor's advice. Forge PC has not tested these units or timed their batteries.