Skip to content

Best PicksCPU Cooling

Best Fan Control Software for Windows in 2026: Free and Paid Options

Fan Control is the best fan software for most Windows PCs: it's free, controls CPU, case and supported GPU fans in one app and can mix curves from several sensors. Use your motherboard BIOS if you'd rather run no software, or Argus Monitor, a paid tool with a 30-day trial, for fan control plus monitoring.

By , Editorial team

4 min read

Best Fan Control Software for Windows in 2026: Free and Paid Options

Fans that roar when you open a browser tab, or case fans that ignore a hot graphics card, are among the most common annoyances in a self-built PC. Your motherboard's BIOS can set fan curves, but Windows software can do more: it can use any temperature sensor, mix several of them, and control CPU, case and GPU fans from one place.

We've picked the options below from each developer's own documentation and feature lists. Forge PC hasn't run a hands-on test of these tools for this guide, so we don't make claims about noise levels or temperatures.

Quick picks

Pick

Best for

Cost

Fan Control (Rémi Mercier)

Most Windows users who want one tool for every fan

Free (donations welcome)

Your motherboard's UEFI/BIOS

Simple, set-and-forget curves with no software running

Free

Argus Monitor

Users who want a polished paid tool with monitoring and RGB extras

Paid, with a 30-day full trial

1. Fan Control: best overall

Why it's our pick: Fan Control is a free Windows app that pulls CPU, GPU, motherboard and AIO fans into one interface, so you stop juggling several vendor apps. Its developer describes it as "lean" and "bloat-free", and it's free to download, with optional donations.

What it does well, according to its website and documentation:

  • Seven fan curve types, including a custom graph, linear curves, triggers, flat values, sync and mix curves. Mixing is the headline feature: you can combine, say, a CPU curve and a GPU curve and tell your case fans to follow whichever is higher (or the average).

  • Calibration: it measures each fan's start, stop, minimum and maximum speeds and builds an RPM-to-percentage graph, so you can set curves in RPM if you prefer.

  • Fine control over step-up and step-down rates, start and stop percentages, response time and hysteresis, which helps stop fans constantly ramping up and down.

  • Custom sensors such as a time-averaged temperature, so brief spikes don't send fans to full speed.

  • Plugins for extra hardware, and the ability to run as a service at boot without anyone signed in.

Its hardware support is mainly based on LibreHardwareMonitor, an open-source project, though Fan Control's own source code is closed. You can install it from the GitHub release page or with winget install Rem0o.FanControl, as its README shows. If you prefer installing apps from the command line, our winget guide covers the basics.

Things to know:

  • GPU fans have limits. Fan Control's documentation says modern NVIDIA RTX cards have a 30% minimum and can't be set to 0 RPM manually; the app releases control at 0% so the card's own zero-RPM mode can take over. On AMD cards, applying fan settings from Fan Control resets Adrenalin's overclocking tuning to defaults, and there's usually a 30% minimum too.

  • Keep it updated. The README says versions 237 and earlier used a WinRing0 driver that Windows Defender now flags, which can stop sensors being detected; version 238 and later use a PawnIO build instead.

2. Your motherboard's UEFI/BIOS: best no-software option

If you don't want another app running in the background, set your curves in the motherboard firmware. Almost every modern desktop motherboard offers fan curves for its headers, they work before Windows loads, and they keep working if you reinstall Windows. The downside is that BIOS curves can usually only follow sensors the board itself can see, such as the CPU or motherboard temperature, not your graphics card.

Our step-by-step guide to setting fan curves covers BIOS curves in detail, and our PWM vs DC fans explainer explains which control mode to choose for each header.

3. Argus Monitor: best paid alternative

Argus Monitor is a paid Windows tool that combines fan control with hardware monitoring. Its developer offers a fully functional 30-day evaluation, so you can try it before buying.

According to its website, it can control fans on motherboard headers, supported AIO coolers and external fan controllers, using fixed values or curves based on any temperature source, including GPU, motherboard, AIO and HDD/SSD temperatures. It can run several controllers in parallel for one fan and use the highest result, switch between fan profiles with hotkeys, and smooth fan changes with hysteresis, time averaging and rate limits. It also adds a sidebar gadget, tray icons and RGB control for a limited list of devices.

Choose Argus Monitor if you want fan control and monitoring in one paid, supported package. For most people, Fan Control does the fan side for free.

How to set up quieter fans, whichever tool you use

  1. Check your fans are wired correctly. PWM fans on PWM headers give the finest control; see our PWM vs DC guide.

  2. Pick the right sensor. CPU cooler fans should follow the CPU; case fans often work better following the GPU or a mix of both, because the graphics card usually dumps the most heat into the case.

  3. Use a gentle curve with some hysteresis or averaging, so fans don't surge every time a temperature briefly spikes.

  4. Check temperatures under load afterwards. Our guide to monitoring temperatures with HWiNFO and Afterburner shows how, and our case fan airflow guide helps if temperatures are still high.

  5. Don't run several fan tools at once. Two apps fighting over the same fan can make it behave erratically. If you install Fan Control, remove or disable fan control in other utilities.

Our verdict

Fan Control is the best fan control software for most Windows PCs: it's free, controls CPU, case and supported GPU fans from one place, and its mix curves let case fans react to whichever part is hottest. Use your BIOS if you'd rather run no software at all, and consider Argus Monitor, a paid tool with a 30-day trial, if you want fan control and monitoring in one supported package. Forge PC hasn't tested these tools hands-on.

The bottom line

Fan Control is the best fan control software for most Windows PCs: it's free, controls CPU, case and supported GPU fans from one place, and its mix curves let case fans react to whichever part is hottest. Use your BIOS if you'd rather run no software at all, and consider Argus Monitor, a paid tool with a 30-day trial, if you want fan control and monitoring in one supported package. Forge PC hasn't tested these tools hands-on.

Sources

  1. 01Fan Control, official website
  2. 02Fan Control, documentation
  3. 03Rem0o, FanControl.Releases README on GitHub
  4. 04Argus Monitor, Fan Control and System Monitoring with Argus Monitor

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

Windows Hello Face vs Fingerprint: Which Is Better for a Desktop PC?

Versus

Windows Hello Face vs Fingerprint: Which Is Better for a Desktop PC?

Both work well on a desktop, but you need to add hardware. Face sign-in needs a Windows Hello infrared camera, not a normal webcam, and is the convenient choice if you want a webcam anyway. A USB fingerprint reader is the simpler add-on if you don't want a camera. Microsoft requires a false accept rate below 0.001% for face and large fingerprint sensors.

Forge PC Staff3 min

No Sound on Windows 11? How to Fix Speakers and Headsets

How-To

No Sound on Windows 11? How to Fix Speakers and Headsets

First check Windows is sending audio to the right device: on a desktop, a monitor connected over HDMI or DisplayPort is a common culprit. Then check cables, jacks, mute and volume, turn off audio enhancements, run the Get Help audio troubleshooter, check the volume mixer, install updates and restart, and finally update or reinstall the audio driver.

Forge PC Staff3 min

How to Check Your Motherboard Model in Windows 11

How-To

How to Check Your Motherboard Model in Windows 11

Press Windows + R, type msinfo32 and look for Baseboard Manufacturer and Baseboard Product on the System Summary page. For copyable text, run Get-CimInstance Win32_BaseBoard in PowerShell, or use CPU-Z's Mainboard tab for BIOS and chipset details too. On prebuilts and laptops, use the PC maker's model number and support page instead.

Forge PC Staff3 min

Best Free File Compression Software for Windows in 2026

Best Picks

Best Free File Compression Software for Windows in 2026

7-Zip is the best free archiver for most people: free for any use, it creates encrypted 7z and ZIP files and opens dozens of formats including RAR. NanaZip adds proper Windows 11 context-menu integration and extra formats, and PeaZip supports over 200 archive types. Windows 11 24H2 can open ZIP, RAR, 7z and TAR itself, but not encrypted archives.

Forge PC Staff3 min