If you have an HDR monitor or TV, Windows 11 can drive it in HDR for games, films and HDR apps. Microsoft says that with an HDR10-capable display and a PC that supports HDR and wide colour gamut, you get a brighter, more vibrant and more detailed picture than on a standard dynamic range (SDR) display. Getting there is mostly a matter of a few settings, but the defaults do not always look right on the desktop, which is where many people give up.
This guide follows Microsoft's official support pages for HDR in Windows 11. Forge PC has not tested these steps on every monitor and graphics card, and the menus on your display will differ by make and model.
What you need
An HDR10-capable display, connected directly to your graphics card. Microsoft recommends looking for displays that are certified for HDR, because many HDR displays are designed mainly for films and video.
A recent graphics card and driver. Microsoft's HDR Calibration app lists AMD RX 400 series or later, Intel 11th Gen integrated graphics or later and NVIDIA GTX 10 series or later, with a WDDM 2.7 or newer driver. Our guide to updating graphics drivers shows how.
DisplayPort if possible. Microsoft says that if colours look wrong and your display supports HDR over DisplayPort, you should use DisplayPort rather than HDMI.
Many monitors and TVs need HDR enabled in their on-screen menu before Windows can use it. Microsoft's first troubleshooting step is to check your display's documentation for this, so look for an HDR setting in the menu.
Step 2: Turn on HDR in Windows 11
Select Start, then Settings > System > Display.
If you have more than one monitor, choose the HDR-capable display at the top.
Turn on Use HDR (shown simply as HDR on some versions).
The screen may go black for a moment as it switches. If you have a laptop connected to an external HDR screen, Microsoft notes that HDR is not supported when the desktop is duplicated across both screens, so set Windows to extend the desktop instead.
Step 3: Balance SDR content brightness
With HDR on, normal desktop apps are SDR content shown inside an HDR signal, and they can look too bright, too dark or washed out. Microsoft's fix:
Go to Settings > System > Display and select HDR.
If you have several displays, move the Settings window onto the HDR display you are adjusting.
Drag the SDR content brightness slider until normal windows look comfortable next to HDR content.
On a laptop's built-in HDR screen, Microsoft says the slider is labelled HDR content brightness instead and adjusts HDR content relative to SDR. If some apps still look dimmer than others, Microsoft suggests restarting the app, or lowering the SDR slider and turning up brightness in the monitor's own menu.
Step 4: Calibrate with the Windows HDR Calibration app
Microsoft's free Windows HDR Calibration app, available from the Microsoft Store, helps the display reproduce HDR more accurately. It uses three test patterns recommended by the HDR Gaming Interest Group (HGIG) to find the darkest visible detail, the brightest visible detail and your display's maximum brightness.
Install the app from the Microsoft Store and make sure HDR is on.
Open it from Start > All apps > Windows HDR Calibration, on the HDR display, running full screen.
On each test pattern, drag the slider until the pattern is no longer visible.
Set the colour saturation slider. Microsoft warns that pushing it too far can make HDR content look unnatural and over-saturated.
Microsoft's tips: turn off any post-processing effects in the monitor's menu first, calibrate in your usual room lighting, and rerun the app whenever you change your display setup. The app saves a colour profile, which you can remove later in Color Management in Control Panel.
Step 5: Check your display really supports HDR10
If the HDR switch is missing or will not stay on, Microsoft suggests checking with the DirectX Diagnostic Tool:
Press Windows + R, type dxdiag and select OK.
Select Save All Information and save the text file.
Open the file and look under Advanced Color. AdvancedColorSupported means the driver and display support HDR10, and AdvancedColorEnabled means HDR is on.
Under Monitor Capabilities, HDR Supported means the display supports HDR10. Microsoft says it must also list BT2020RGB or BT2020YCC, and Eotf2084Supported.
Common problems and fixes
Colour fringes around text over HDMI: use DisplayPort if you can. If HDMI is your only option, Microsoft suggests lowering the refresh rate to 30Hz or the resolution to 1920 x 1080 at 60Hz.
Laptop turns HDR off on battery: this is a default power setting. Expand the HDR section in Settings > System > Display > HDR and untick the battery options, or plug in.
Night light makes HDR look red: reduce the night light strength slider.
Dolby Vision monitor looks dim: Windows chooses Dolby Vision automatically when available. Microsoft says some monitors limit peak brightness in that mode, and you can untick Use Dolby Vision mode in the HDR settings to use HDR10 instead.
For games, Windows 11 also offers Auto HDR for older titles; our Windows 11 gaming settings guide covers it alongside other options. If you are shopping for a display, our OLED vs Mini-LED monitor guide compares two popular display types for HDR.
Our verdict
Setting up HDR on Windows 11 is quick: enable HDR on the display, turn on Use HDR in Settings > System > Display, then set the SDR content brightness slider so the desktop looks normal. The step most people skip is Microsoft's free Windows HDR Calibration app, which takes a few minutes and tunes HDR to your actual display. If HDR will not turn on, dxdiag will tell you whether your display and driver really support HDR10. These steps follow Microsoft's support pages; Forge PC has not tested them on every display.