Overclocking a graphics card means running its GPU core and memory faster than the factory settings. The free MSI Afterburner tool is the usual way to do it on Windows, and MSI says it works with almost any GPU, not just MSI cards. This guide follows MSI's own overclocking walkthrough and support documentation. Forge PC hasn't tested these settings on specific cards, and we don't quote expected gains: every chip is different, and MSI itself warns that results vary because of the "silicon lottery".
If you'd rather run cooler and quieter, undervolting uses the same tool and is often the better trade.
Before you start
Check your warranty. MSI's support page says that while overclocking is generally safe, any damage caused during the process is not covered by warranty. Check your own card maker's terms before you begin.
Download Afterburner only from msi.com or guru3d.com. MSI warns that phishing sites have offered modified installers that steal data.
Update your graphics driver first, and let the installer add RivaTuner Statistics Server if you want the on-screen display.
Get a test tool. MSI suggests a benchmark or stability tool such as Unigine Heaven or FurMark. Note your baseline result and Afterburner's GPU clock, memory clock, voltage and temperature readings so you can compare later.
Check your power cables. MSI says overclocking can raise power draw, and that you should use a separate PSU cable for each power connector on the card rather than one cable and its daisy-chained pigtail, because transient spikes can trip the power supply's protection. On cards with a 12V-2x6 connector, follow our guide to connecting it safely.
In Afterburner's Settings, turn on Unlock voltage control and Unlock voltage monitoring, then restart the app. Save your work and close other apps before you begin.
Method 1: OC Scanner (recommended by MSI)
OC Scanner tests your card and builds a custom voltage/frequency curve automatically. MSI says it takes about 30 minutes, sometimes less.
In the main window, move the power limit, temperature limit and core voltage sliders to their maximum and click Apply.
Open the Curve Editor (Ctrl+F) and click OC Scanner, or click the magnifying-glass "OC" icon in the main window.
Click Scan and wait. When it finishes, the core clock value in the main window shows Curve.
Save the result to a profile or two with the save (floppy disk) icon. MSI notes that number keys 1-5 load profiles and Ctrl+1 to Ctrl+5 delete them, so be careful.
Click Apply.
MSI says OC Scanner may set the memory clock to a conservative +200MHz. Tune memory separately afterwards, as below.
Method 2: manual overclocking
MSI recommends doing the core first, then the memory:
Set the power and temperature limits to maximum and click Apply.
Raise Core Clock by 20-30MHz at a time. Click Apply and test after each step.
When you find a stable core setting, save it to a profile.
Raise Memory Clock by 50-100MHz at a time and test. If you see glitches, MSI says to lower it by 10MHz at a time until it's stable.
Save the final settings, then consider scaling the core and memory back slightly for better long-term stability, as MSI suggests.
As the card draws more power it produces more heat, so you may also want a custom fan curve. Afterburner has one under Settings > Fan; our fan curve guide explains how to shape one.
How to test stability
MSI's advice is to run your benchmark for 10 minutes while looking for flickering, glitches, black screens or crashes, then play the games you actually use. If anything goes wrong, step back to your last saved profile. For longer checks, see our PC stress test guide, and watch temperatures with HWiNFO and Afterburner's overlay.
When you're happy, click Apply at Windows Startup in the top-right of Afterburner so the profile loads every time. MSI notes that the profile lock icon must be unlocked for that button to work.
How to undo it, and what to do if it crashes
Reset to stock: click the circular-arrow reset icon or press Ctrl+D. Your saved profiles are kept.
Blue screen or freeze: MSI says you'll need to restart the PC; then load your last stable saved profile.
Black screen that doesn't recover: MSI says to hold the power button for more than 4 seconds, or switch the PSU off, wait 10 seconds and switch it back on.
Still won't boot: as a last resort, MSI suggests clearing the CMOS.
On laptops, MSI says Afterburner works but you should use small increments and watch both CPU and GPU temperatures. Laptop GPUs can't use Afterburner's custom fan curves, because the fan behaviour is set by the manufacturer in the BIOS.
Our verdict
Start with OC Scanner: max the power and temperature limits, run the scan, save the curve and test for 10 minutes. If you overclock manually, raise the core 20-30MHz at a time, then the memory 50-100MHz at a time, testing after every step and backing off at the first glitch. Check your warranty and power cables first, and press Ctrl+D to undo everything. Forge PC hasn't tested these settings; the method follows MSI's documentation.