Skip to content

How-ToOS

How to Fix Audio Crackling and DPC Latency on Windows With LatencyMon

Audio crackling and dropouts on Windows are often caused by a driver running too long at high priority. The free LatencyMon Home Edition measures ISR and DPC execution times and hard pagefaults, and in most cases names the driver responsible. Updating, rolling back or temporarily disabling that driver, plus installing chipset drivers and the latest BIOS, fixes most cases. Forge PC has not tested L

By , Editorial team

5 min read

How to Fix Audio Crackling and DPC Latency on Windows With LatencyMon

If your PC's audio crackles, pops or briefly drops out, especially when you're gaming, streaming or recording, the cause often isn't your speakers or headset. It can be a driver that briefly ties up the CPU, so audio data doesn't arrive in time. This is usually called DPC latency, and the free LatencyMon tool is the standard way to track it down.

Forge PC has not tested LatencyMon for this guide. The steps and explanations are based on Resplendence Software's documentation for LatencyMon, Microsoft's documentation for Windows driver developers and audio interface maker Focusrite's DPC latency troubleshooting guide.

What is DPC latency?

Resplendence, which makes LatencyMon, explains that Windows isn't a real-time operating system. It handles requests on a best-effort basis, without guaranteeing they're processed within a set time. That's fine for most tasks, but real-time audio has to deliver buffers of sound data at regular intervals. If a buffer misses its deadline, you hear a dropout, click or pop.

Two kinds of kernel activity can get in the way:

  • Interrupt service routines (ISRs). When a device such as a network card or graphics card needs attention, it raises an interrupt and its driver's ISR runs.

  • Deferred procedure calls (DPCs). Microsoft explains that because ISRs need to finish as quickly as possible, drivers postpone the rest of the work to a DPC, which runs later at a lower priority level than the ISR.

Both run at a higher priority than normal programs, including your audio software. Resplendence says general guidelines recommend keeping ISR and DPC execution times below about 100 microseconds. When a badly behaved driver takes much longer, audio threads can miss their deadlines.

LatencyMon also tracks hard pagefaults: when a program needs data that Windows has to fetch from the page file or another file on disk. Resplendence says these can take a long time to resolve and cause dropouts if they happen during audio processing.

Step 1: Download and run LatencyMon

  1. Download LatencyMon from resplendence.com. The Home Edition is free; the latest version at the time of writing was 7.40.

  2. Install it and run it.

  3. Close anything you don't need, but keep running whatever makes the crackling happen, such as a game, a music app or your streaming software.

  4. Click the Start (play) button to begin measuring.

  5. Let it run while you reproduce the problem. Focusrite recommends playing audio for at least 15 minutes, with the glitches happening at least once during the test.

  6. Click Stop.

Step 2: Read the results

LatencyMon's Main tab gives an overall verdict on whether your system is suitable for real-time audio, along with the highest measured kernel timer latencies and the longest ISR and DPC execution times. Resplendence says it also shows detailed hard pagefault statistics.

The Drivers tab is where you find the culprit. Focusrite suggests clicking the Highest execution (ms) column heading twice so the worst drivers are at the top, and says any driver above 0.5ms could be causing audio problems. Resplendence says LatencyMon can identify the drivers and processes responsible in most cases.

Focusrite's guide lists some drivers that commonly appear:

Driver

What it is (according to Focusrite)

ACPI.sys

Power management

dxgkrnl.sys, nvlddmkm.sys, amdkmdag.sys

Graphics (Windows, NVIDIA and AMD)

ndis.sys, tcpip.sys

Networking

storport.sys

Storage

USBPORT.sys

USB

Wdf01000.sys

Windows Driver Framework

Check the Processes tab, or the hard pagefault figures, if the problem looks like pagefaults rather than drivers.

Step 3: Fix the driver that's causing it

Once you know which driver is causing the spikes, work through these fixes one at a time and run LatencyMon again after each change:

  1. Update the driver. Get the latest version from your motherboard, laptop or device maker. For graphics drivers, see our graphics driver update guide. If the graphics driver is still the problem, Focusrite suggests trying NVIDIA's Studio driver or, where your card supports it, AMD Software: PRO Edition, both of which are aimed at stability in professional apps.

  2. Install your chipset drivers. Our chipset driver guide explains how for AMD and Intel boards.

  3. Try an older version. If a problem started after an update, roll the driver back in Device Manager (right-click the device, choose Properties, then the Driver tab and Roll Back Driver).

  4. Do a clean graphics driver install. If the GPU driver is the culprit, a clean install with DDU removes leftovers from older versions.

  5. Disable devices you don't use. As a test, disable an unused Wi-Fi adapter, Bluetooth, built-in sound card or SD card reader in Device Manager and see whether the spikes stop. Focusrite says built-in SD card readers have been seen to cause high USBPORT.sys latency, and that network-related latency can come from apps using the internet in the background. Re-enable anything that makes no difference.

  6. If ACPI.sys is the culprit on a laptop, Focusrite suggests plugging in the charger rather than running on battery, and checking your power plan and USB power management settings.

  7. Update your BIOS. Firmware updates sometimes fix device and power-management problems. Follow our safe BIOS update guide.

Step 4: Reduce hard pagefaults

If LatencyMon points to hard pagefaults, your PC may be short of memory for what you're running. Close background apps, and check how much memory you're using in Task Manager. If you're regularly near the limit, our guide to how much RAM a gaming PC needs can help you decide whether to upgrade.

Still crackling?

If LatencyMon shows no problems but your audio still crackles, the cause may be elsewhere: a damaged cable, a USB headset or audio interface on an overloaded hub, or audio settings such as a buffer size that's too small in your recording software. Try a different USB port, ideally one directly on the motherboard.

Our verdict

Audio crackling and dropouts on a Windows PC are often caused by a driver that runs for too long at high priority. LatencyMon's free Home Edition measures ISR and DPC execution times and hard pagefaults, and in most cases names the driver responsible. Updating, rolling back or temporarily disabling that driver, plus installing chipset drivers and the latest BIOS, fixes most cases. Forge PC has not tested LatencyMon for this guide; the steps are based on Resplendence's, Microsoft's and Focusrite's documentation.

The bottom line

Audio crackling and dropouts on a Windows PC are often caused by a driver that runs for too long at high priority. LatencyMon's free Home Edition measures ISR and DPC execution times and hard pagefaults, and in most cases names the driver responsible. Updating, rolling back or temporarily disabling that driver, plus installing chipset drivers and the latest BIOS, fixes most cases. Forge PC has not tested LatencyMon for this guide; the steps are based on Resplendence's, Microsoft's and Focusrite's documentation.

Sources

  1. 01Resplendence Software, LatencyMon
  2. 02Microsoft Learn, Introduction to DPC objects
  3. 03Focusrite, Troubleshooting DPC latency

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

How-To

How to Use System Restore in Windows 11: Turn It On, Create a Restore Point and Roll Back

Microsoft says System Protection isn't on by default. Search for Create a restore point, select your C: drive, choose Configure and turn it on, then create a restore point before installing drivers or tools. To roll back, run rstrui.exe, or use Troubleshoot > Advanced options > System Restore in Windows RE. Personal files aren't affected, but it isn't a backup.

Forge PC Staff3 min

How to Use Live Captions and Translation in Windows 11

How-To

How to Use Live Captions and Translation in Windows 11

Press Windows + Ctrl + L to turn on live captions in Windows 11 22H2 or later, download the language files, then dock or float the captions and pick a style. Captions are generated on the device and work offline. On a Copilot+ PC with 24H2 or later, live captions can translate from over 40 languages into English and 27 into Chinese (Simplified).

Forge PC Staff3 min

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

How-To

How to Manage Ollama Models: List, Remove and Move Them to Another Drive

Run ollama ls to list your models, ollama ps to see what's loaded, ollama stop to unload one and ollama rm to delete it. On Windows, models are stored in C:\Users\%username%\.ollama\models; to move them, quit Ollama, set an OLLAMA_MODELS user environment variable to a folder on a bigger drive and restart Ollama.

Forge PC Staff3 min

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

Best Picks

Best Free Benchmark Software for PC in 2026: CPU, GPU, SSD and AI Tests

The best free PC benchmarks in 2026: Cinebench 2026 for CPUs, Unigine Superposition Basic or 3DMark's free Steel Nomad test for graphics cards, CrystalDiskMark for SSDs, Geekbench 7 for cross-platform scores, Geekbench AI for NPUs, Blender Benchmark for creators and OCCT for stability. Run each test twice and download only from official sites.

Forge PC Staff5 min