Skip to content

How-ToCPU

How to Enable Virtualization (SVM or VT-x) in Your BIOS for WSL 2 and Docker

Check Task Manager's Performance tab or systeminfo first, as virtualization is often already on. If not, restart into the UEFI from Settings > System > Recovery, enable SVM Mode (AMD) or Intel (VMX) Virtualization Technology (Intel) under CPU Configuration, save with F10, and make sure the Virtual Machine Platform feature is enabled for WSL 2.

By , Editorial team

4 min read

How to Enable Virtualization (SVM or VT-x) in Your BIOS for WSL 2 and Docker

If WSL 2 fails to install with error 0x80370102, Docker Desktop won't start, or a virtual machine app says hardware virtualization isn't available, the fix is often a single setting in your motherboard's BIOS. On AMD boards it's usually called SVM Mode; on Intel boards it's Intel (VMX) Virtualization Technology, often shortened to VT-x.

This guide is based on Microsoft's, Docker's and ASUS's official documentation. Forge PC hasn't tested every motherboard, and menu names vary between manufacturers, so check your board's manual if your screens look different.

Why you might need it

Virtualization lets your PC run other operating systems inside Windows. Microsoft says enabling it lets your device emulate a different operating system, such as Android or Linux. On a desktop PC, the usual reasons are:

Microsoft notes that many Windows devices already have virtualization enabled, and ASUS says Intel VMX is enabled by default on its Intel motherboards. So check first before you go into the BIOS.

Step 1: Check whether virtualization is already on

Docker's troubleshooting guide gives two quick checks:

  1. Task Manager: press Ctrl + Shift + Esc, open the Performance tab and select CPU. Look for Virtualization in the details under the graph.

  2. systeminfo: open Terminal and type systeminfo. If the Hyper-V section says "A hypervisor has been detected. Features required for Hyper-V will not be displayed", virtualization is enabled.

If virtualization is already enabled and WSL or Docker still fails, the problem is elsewhere: jump to the troubleshooting section below.

Step 2: Get into the BIOS (UEFI)

Microsoft's route works on any Windows 11 PC:

  1. Open Settings > System > Recovery.

  2. Next to Advanced startup, select Restart now.

  3. Choose Troubleshoot > Advanced options > UEFI Settings > Restart (on some PCs this is labelled UEFI Firmware Settings).

Alternatively, press the setup key while the PC starts. On ASUS boards that's Delete (ASUS also mentions F2 on some models).

Microsoft's advice is worth repeating: only change what you need to in the BIOS, because adjusting other settings could stop Windows from starting.

Step 3: Turn on SVM Mode (AMD) or Intel VMX (Intel)

The exact menu path depends on the manufacturer. ASUS's instructions for its motherboards are:

AMD (Ryzen) boards:

  1. Enter the BIOS and switch to Advanced Mode (press F7 if you start in EZ Mode).

  2. Go to Advanced > CPU Configuration.

  3. Set SVM Mode to Enabled.

  4. Press F10 and confirm to save and restart.

Intel boards:

  1. Enter the BIOS and switch to Advanced Mode (F7 from EZ Mode).

  2. Go to Advanced > CPU Configuration.

  3. Set Intel (VMX) Virtualization Technology to Enabled.

  4. Press F10 and confirm to save and restart.

ASUS also notes that Intel virtualization comes in several parts, VT-x, VT-d and VT-c, depending on the board. For WSL 2, Docker and everyday virtual machines, the CPU setting above is the one that matters. On MSI, Gigabyte, ASRock and other boards, look for the same names (SVM, AMD-V, VMX, VT-x or "Virtualization Technology"), usually under CPU or overclocking settings, or search your board's manual. Microsoft's support page links to the instructions from major PC makers.

Step 4: Turn on the Windows features

The BIOS setting alone isn't always enough. Microsoft's WSL installation guide says you may need to enable the Virtual Machine Platform component. Open PowerShell as administrator and run:

dism.exe /online /enable-feature /featurename:VirtualMachinePlatform /all /norestart

Then restart. Microsoft says the wsl --install command, run in an administrator PowerShell window, enables the features needed for WSL by itself, so you only need the manual command if you're installing WSL another way.

Troubleshooting

  • WSL error 0x80370102 or 0x80070003: Microsoft's WSL troubleshooting page says to make sure virtualization is enabled in the BIOS and that the Virtual Machine Platform feature is turned on. It also notes WSL 2 needs a CPU with Second Level Address Translation (SLAT), which Microsoft says arrived with Intel's first-generation Core (Nehalem) processors and AMD Opteron, so any recent desktop CPU has it.

  • Docker Desktop still won't start: Docker says it needs both virtualization and either WSL 2 or Hyper-V. Its Windows requirements also list a 64-bit CPU with SLAT and 8GB of system RAM for WSL 2.

  • The option is missing or greyed out: update your BIOS (see our safe BIOS update guide) and check your board's manual.

  • The PC won't boot after changing settings: if you changed more than virtualization by mistake, clearing the CMOS resets the BIOS to defaults.

While you're in the BIOS, you may also want to check Secure Boot and TPM; our Secure Boot and TPM guide explains them.

Our verdict

To enable virtualization, check Task Manager or systeminfo first, because it's often already on. If it isn't, restart into the UEFI from Settings > System > Recovery, set SVM Mode (AMD) or Intel (VMX) Virtualization Technology (Intel) to Enabled under the CPU settings, save with F10 and make sure the Virtual Machine Platform feature is on. That fixes most WSL 2 and Docker Desktop start-up errors. Forge PC hasn't tested every board, so follow your manual if menus differ.

The bottom line

To enable virtualization, check Task Manager or `systeminfo` first, because it's often already on. If it isn't, restart into the UEFI from Settings > System > Recovery, set SVM Mode (AMD) or Intel (VMX) Virtualization Technology (Intel) to Enabled under the CPU settings, save with F10 and make sure the Virtual Machine Platform feature is on. That fixes most WSL 2 and Docker Desktop start-up errors. Forge PC hasn't tested every board, so follow your manual if menus differ.

Sources

  1. 01Microsoft Support, Enable Virtualization on Windows
  2. 02Microsoft Learn, Install WSL
  3. 03Microsoft Learn, Troubleshooting Windows Subsystem for Linux
  4. 04Docker Docs, Troubleshoot topics for Docker Desktop
  5. 05Docker Docs, Install Docker Desktop on Windows
  6. 06ASUS Support, How to set VT (Virtualization Technology) in BIOS
  7. 07ASUS Support, How to enable Intel (VMX) Virtualization Technology in the BIOS

About the author

Forge PC Staff

Editorial team

The shared byline for articles researched, written and edited by the Forge PC editorial team. How we source, check and correct our work is set out in our editorial policy.

More from Forge PC Staff

Read next

Windows Hello Face vs Fingerprint: Which Is Better for a Desktop PC?

Versus

Windows Hello Face vs Fingerprint: Which Is Better for a Desktop PC?

Both work well on a desktop, but you need to add hardware. Face sign-in needs a Windows Hello infrared camera, not a normal webcam, and is the convenient choice if you want a webcam anyway. A USB fingerprint reader is the simpler add-on if you don't want a camera. Microsoft requires a false accept rate below 0.001% for face and large fingerprint sensors.

Forge PC Staff3 min

No Sound on Windows 11? How to Fix Speakers and Headsets

How-To

No Sound on Windows 11? How to Fix Speakers and Headsets

First check Windows is sending audio to the right device: on a desktop, a monitor connected over HDMI or DisplayPort is a common culprit. Then check cables, jacks, mute and volume, turn off audio enhancements, run the Get Help audio troubleshooter, check the volume mixer, install updates and restart, and finally update or reinstall the audio driver.

Forge PC Staff3 min

How to Check Your Motherboard Model in Windows 11

How-To

How to Check Your Motherboard Model in Windows 11

Press Windows + R, type msinfo32 and look for Baseboard Manufacturer and Baseboard Product on the System Summary page. For copyable text, run Get-CimInstance Win32_BaseBoard in PowerShell, or use CPU-Z's Mainboard tab for BIOS and chipset details too. On prebuilts and laptops, use the PC maker's model number and support page instead.

Forge PC Staff3 min

Best Free File Compression Software for Windows in 2026

Best Picks

Best Free File Compression Software for Windows in 2026

7-Zip is the best free archiver for most people: free for any use, it creates encrypted 7z and ZIP files and opens dozens of formats including RAR. NanaZip adds proper Windows 11 context-menu integration and extra formats, and PeaZip supports over 200 archive types. Windows 11 24H2 can open ZIP, RAR, 7z and TAR itself, but not encrypted archives.

Forge PC Staff3 min