Secure Boot and TPM 2.0 used to be things only IT departments cared about. Now they decide whether some games will launch. EA says Battlefield 6 requires both on PC, and Windows 11 itself relies on TPM 2.0. Self-built PCs are the most likely to have them switched off: Microsoft says most retail motherboards ship with TPM turned off by default, even though it can almost always be enabled.
Forge PC has not tested these steps on a specific motherboard for this guide. They are based on Microsoft's and EA's support pages, checked on 15 November 2026. Firmware menus differ between motherboard makers, so keep your board's manual to hand, and back up your PC before changing boot settings.
What these settings do
Secure Boot is a UEFI feature that, in Microsoft's words, helps prevent malicious software from loading when the PC starts by only allowing trusted, digitally signed software during boot.
TPM 2.0 (Trusted Platform Module) is a security chip, usually built into the processor on modern PCs. Windows 11 uses it for features including Windows Hello and BitLocker.
EA says it uses Secure Boot to support its Javelin anti-cheat. Its Battlefield 6 PC requirements list TPM 2.0 enabled, Secure Boot enabled, and a PC that is HVCI and VBS capable.
Step 1: Check what you have now
Secure Boot: press Windows + R, type msinfo32 and press Enter. Under System Summary, look at two lines:
EA's guide says that if Secure Boot State is "Unsupported", you should check your motherboard's manual or specifications. If BIOS Mode says "Legacy", read Step 2 before changing anything.
TPM: press Windows + R, type tpm.msc and press Enter. Microsoft says the Status should show the TPM is ready, and the Specification Version should be 2.0. If you see "Compatible TPM cannot be found", the TPM is probably disabled in your firmware.
Step 2: Make sure your Windows drive is GPT
Secure Boot needs the Windows drive to use the GPT partition style rather than the older MBR. Most PCs installed with Windows 11 are already GPT. To check, right-click Start, open Disk Management, right-click the disk that holds C:, choose Properties and look at Partition style on the Volumes tab.
If it says MBR, EA's guide uses Microsoft's built-in MBR2GPT tool from an administrator PowerShell window:
mbr2gpt /validate /disk:0 /allowfullOS
If validation passes, mbr2gpt /convert /disk:0 /allowfullOS
Replace 0 with your Windows disk's number. Back up first; this changes how the drive boots. After converting, you will need to switch the firmware to UEFI mode in the next step or the PC won't boot from that drive.
Step 3: Open your UEFI firmware settings
You can get there from Windows: Microsoft's route is Settings > System > Recovery, then Restart now next to Advanced startup. EA's guide then has you choose Advanced options > UEFI Firmware Settings (found under Troubleshoot on the blue Choose an option screen) and restart. Alternatively, press your motherboard's setup key during start-up. If you have never been into the firmware before, our guide to updating your BIOS safely explains the basics, and a recent BIOS is a good idea anyway.
Step 4: Turn on TPM
EA says the setting may be called TPM, Trusted Platform Module, Intel Platform Trust Technology (PTT) on Intel boards, or AMD fTPM on AMD boards. It is usually in a security or advanced CPU menu. Enable it, save and restart, then check tpm.msc again.
Step 5: Turn off CSM and turn on Secure Boot
Microsoft says Secure Boot needs the PC to boot in UEFI mode rather than "Legacy" BIOS, also called CSM (Compatibility Support Module). If your firmware offers both, set UEFI as the only or first option. Then find the Secure Boot setting, usually in a Boot or Security menu, and enable it. Exact steps vary, so follow your motherboard manual. Save, restart and check msinfo32 again.
Secure Boot certificates are being updated in 2026
Microsoft says the Secure Boot certificates originally issued in 2011 begin expiring in June 2026, and that on a supported version of Windows the replacement happens automatically. Keeping Windows up to date, and your motherboard firmware reasonably current, is the simplest way to make sure Secure Boot keeps working.
If something goes wrong
The PC won't boot after enabling Secure Boot or disabling CSM: the Windows drive may still be MBR (see Step 2). Undo the firmware change you just made, using your motherboard manual if needed, then check the partition style before trying again.
The game still says Secure Boot is off: recheck msinfo32. EA's guide treats BIOS Mode "UEFI" and Secure Boot State "On" as the target.
Other security warnings: see our story on Windows 11 Memory Integrity, which is related to the HVCI requirement.
Our verdict
Check msinfo32 and tpm.msc first; many PCs only need two switches flipped in the firmware. Make sure the Windows drive is GPT before you disable CSM, turn on fTPM or PTT, then enable Secure Boot, and back up before you start. Once both are on, Battlefield 6's checks should pass, and Windows 11's security features have what they need. Forge PC has not tested these steps on a specific board; they are based on Microsoft and EA documentation.