Skip to content

VersusGPU

RAG vs Fine-Tuning for Local AI: Which Should You Use on Your PC?

RAG vs fine-tuning for local AI: RAG feeds a model relevant chunks of your documents for each question, while fine-tuning changes the model's weights. For most home PCs, start with RAG; fine-tune for style, format or specialised tasks.

By , Senior Hardware Editor

4 min read

RAG vs Fine-Tuning for Local AI: Which Should You Use on Your PC?

Once you've got a local AI model running, the next question is usually how to make it useful for your own stuff: your notes, your manuals, your code or your writing style. There are two main ways to do it. Retrieval-augmented generation (RAG) feeds the model relevant snippets of your documents at the moment you ask a question. Fine-tuning changes the model itself by training it on your examples. This explainer is based on documentation from IBM, AnythingLLM and Unsloth.

The short answer

RAG

Fine-tuning

What it changes

What the model sees for each question

The model's weights

Best for

Answering questions from your documents

Style, format, tone and specialised tasks

Updating your data

Add or remove documents any time

Retrain the model

Hardware needed

Enough to run the model, plus a small embedding model

More GPU memory and time to train

Difficulty

Easy with apps like AnythingLLM or Open WebUI

Harder: you need a training dataset

How RAG works

IBM describes RAG as connecting a model to your own data, while fine-tuning retrains a model on a focused set of data. In a local RAG app, the process goes like this, as AnythingLLM's documentation explains:

  1. Your documents are converted to text and split into chunks.

  2. An embedding model turns each chunk into a list of numbers (a vector), which is stored in a vector database.

  3. When you ask a question, your question is turned into a vector too, and the database finds the closest-matching chunks.

  4. Those chunks are added to your prompt, and the model answers using them.

The important point, which AnythingLLM stresses, is that the model never "reads" your whole document set. It only sees the handful of chunks retrieved for each question; AnythingLLM says it gets back 4 to 6 text chunks deemed relevant to your prompt. That's why RAG is good at "what does the manual say about X?" and poor at questions that need every document at once, such as "list the three highest-calorie recipes in this folder".

You can set up RAG on a home PC in an afternoon. Our guide to chatting with your documents in AnythingLLM walks through it, and our guide to embedding models in Ollama explains the embedding step.

How fine-tuning works

Fine-tuning trains an existing model further on your own examples, so the changes live in the model itself. Unsloth's guide says fine-tuning can customise a model's behaviour, add knowledge and improve performance on specific tasks. Most home fine-tuning uses LoRA or QLoRA, which, as Unsloth explains, trains small extra matrices instead of changing every weight in the model, so only about 1% of the weights are optimised.

That makes it possible on consumer hardware. Unsloth says you can fine-tune locally with as little as 3GB of graphics memory using its tools. That figure is for small models; bigger models need more memory. The harder part is the data: you need a dataset of good examples in the format you want the model to learn. Unsloth suggests beginners start with a small instruct model and experiment from there. Our guide to fine-tuning an LLM locally with Unsloth covers the process.

Unsloth also argues that it's a misconception that fine-tuning can't teach new knowledge. That's a fair point, but for documents that change often, retraining every time is still more work than updating a RAG library.

What about just changing the prompt?

Before either, try a system prompt. Ollama's Modelfile lets you set a system prompt and parameters for a custom model in a few lines; see our guide to creating a custom model with a Modelfile. If a good prompt gets you the tone or format you want, you may not need to fine-tune at all.

Which should you use?

  • Questions about your documents, manuals or notes: RAG. It's quicker to set up, works with any model you can already run, and updates as soon as you add a file.

  • A consistent style, format or specialised task, such as always replying in a fixed structure or writing in your voice: fine-tuning, once a system prompt has proved not to be enough.

  • Both: they aren't exclusive. A fine-tuned model can still use RAG to look things up.

Our verdict

For most people running AI on a home PC, start with RAG. It answers questions from your own documents, needs no training, runs on the hardware you already use for local models, and you can add or remove files whenever you like. Fine-tuning is the right tool when you need the model itself to behave differently, such as a fixed style or a specialised task, and a system prompt isn't enough. It takes more effort, mainly in building a good dataset.

The bottom line

For most people running AI on a home PC, start with RAG. It answers questions from your own documents, needs no training, runs on the hardware you already use for local models, and you can add or remove files whenever you like. Fine-tuning is the right tool when you need the model itself to behave differently, such as a fixed style or a specialised task, and a system prompt isn't enough. It takes more effort, mainly in building a good dataset.

Sources

  1. 01IBM, RAG vs. fine-tuning
  2. 02AnythingLLM documentation, Why does the LLM not use my documents?
  3. 03Unsloth documentation, Fine-tuning LLMs guide

About the author

Callum Reid

Senior Hardware Editor

Callum leads GPU, CPU and platform architecture coverage at Forge PC. Before joining the editorial desk, he spent nine years specifying, assembling and stress-testing custom gaming and workstation systems in the UK, with a focus on PCIe bandwidth, VRM thermal design, DDR5 memory tuning and 1440p/4K frame-time consistency.

More from Callum Reid

Read next

How to Find What's Writing to Your SSD in Windows 11

How-To

How to Find What's Writing to Your SSD in Windows 11

How to find which program is writing to your SSD in Windows 11: sort Task Manager by Disk, use Resource Monitor's Write (B/sec) column to see the process and file, and capture a short Process Monitor log filtered to WriteFile.

Marcus Thorne3 min

Best Free Uninstaller Software for Windows 11 in 2026

Best Picks

Best Free Uninstaller Software for Windows 11 in 2026

The best free ways to uninstall programs in Windows 11: Windows Settings and winget for everyday removals, Revo Uninstaller Free for stubborn programs and leftovers, and the open-source Bulk Crap Uninstaller for removing lots of apps at once.

Hannah Vance3 min