GPU-Z is a small free utility from TechPowerUp that shows detailed information about your graphics card. It's handy for confirming what's actually in a PC, checking a second-hand card, or troubleshooting performance. This guide is based on TechPowerUp's official GPU-Z page; Forge PC hasn't tested every card with it.
What GPU-Z can show
TechPowerUp lists GPU-Z's main features as:
support for NVIDIA, AMD, ATI and Intel graphics
adapter, GPU and display information
overclock, default clocks and 3D/boost clocks (where available)
detailed memory reporting: size, type, speed and bus width
a GPU load test to verify the PCI Express lane configuration
validation of results
a backup of your graphics card's BIOS
It needs no installation (an optional installer is available) and supports Windows 11 and 10, as well as older versions. TechPowerUp says it's free for personal and commercial use.
Step 1: download and run it
Download GPU-Z from TechPowerUp's site and run it; TechPowerUp says no installation is required. If your PC has both integrated and dedicated graphics, make sure you're looking at the right one.
Step 2: read the main tab
GPU-Z reports the adapter and GPU, the memory size, type, speed and bus width, and the default and boost clocks. Compare these with the manufacturer's spec page for your model. If the memory size or GPU doesn't match the listing on a used card, walk away.
Step 3: check the PCIe link
TechPowerUp includes a GPU load test to verify the PCI Express lane configuration, so you can check the card is running with the link it should. If a x16 card shows fewer lanes under load, it may be in the wrong slot or not seated properly. Our guide to checking GPU PCIe link speed explains what to look for.
Step 4: monitoring over time
For longer monitoring with an on-screen display, see how to monitor PC temps and FPS, and for VRAM specifically, how to check VRAM usage.
Step 5: back up the BIOS (optional)
GPU-Z can save a copy of your card's BIOS. It's a sensible precaution before any firmware update, but don't flash a BIOS unless the card's maker tells you to.
Privacy note
TechPowerUp says GPU-Z only contacts www.gpu-z.com over HTTPS, for the update check on startup (which you can disable in settings), user-initiated BIOS uploads and the Lookup button.
Our verdict
GPU-Z is the quickest way to confirm which graphics card you have, its memory size and type, its clocks and its PCIe link. Run it without installing, compare the main tab with the maker's specs, and use the load test to check the PCIe link.