Whether you're installing Windows 11 on a new build, trying a Linux distribution or running a rescue tool on a PC that won't start, you'll need a bootable USB drive. There are three popular free ways to make one on Windows, and each suits a different job.
Forge PC hasn't tested these tools on specific hardware for this guide. The steps come from the official documentation for each: Microsoft's Windows 11 download page, the Rufus website and the Ventoy documentation.
Tool | Best for | How it works |
|---|
Media Creation Tool (Microsoft) | A plain Windows 11 installer | Downloads Windows 11 and writes it to a USB drive for you |
Rufus | Writing one ISO to a USB drive, with extra options | Formats the drive and writes the image you choose |
Ventoy | Keeping several ISOs on one drive | Install once, then copy ISO files to the drive and pick one from a boot menu |
Whichever you use, back up anything on the USB drive first. All three will erase it when they set it up.
This is the simplest way to make a Windows 11 installer.
Get a blank USB drive with at least 8GB of space. Microsoft warns that any content on it will be deleted.
Download the Media Creation Tool from Microsoft's Windows 11 download page and run it. Microsoft says you need to be an administrator to run it.
Accept the licence terms, choose Create installation media for another PC, select the language, edition and architecture (64-bit), then choose USB flash drive and select your drive.
Wait for it to download Windows 11 and create the drive.
Microsoft notes that the Media Creation Tool only creates media for x64 processors, not Arm-based PCs. Then follow our guide to installing Windows 11 on a new PC.
Option 2: Rufus
Rufus is a small free utility that, in its own words, "helps format and create bootable USB flash drives". It's useful when you already have an ISO file, such as a Windows 11 ISO from Microsoft's download page or a Linux ISO, and its website notes it can also be used to flash a BIOS or other firmware from DOS.
Download Rufus from rufus.ie. It runs on Windows 8 or later and doesn't need installing; the executable is digitally signed.
Insert your USB drive and select it under Device.
Click Select and choose your ISO file.
Leave the partition scheme and target system on the defaults for a modern UEFI PC unless you know you need something different.
Click Start. When you write a Windows image, Rufus can offer extra options to customise Windows setup; choose only the ones you understand.
Option 3: Ventoy
Ventoy takes a different approach. Instead of writing one image to the drive, you install Ventoy on the drive once and then simply copy ISO files onto it. At boot, Ventoy shows a menu of every image it finds, so one USB drive can hold a Windows installer, several Linux distributions and a few rescue tools.
Download the Windows package (ventoy-x.x.xx-windows.zip) from ventoy.net and unzip it.
Run Ventoy2Disk.exe, select your USB drive and click Install. By default it lists only USB drives, to avoid wiping the wrong disk. The drive will be formatted and everything on it lost.
Ventoy splits the drive into two partitions. Copy your ISO files onto the large first partition (exFAT by default). You can put them in folders; Ventoy searches the whole drive.
Boot from the USB drive and choose an image from the menu.
Ventoy supports ISO files larger than 4GB, both MBR and GPT partition styles, and says it has been tested with more than 1,400 ISO files. You can keep using the drive for ordinary files too, and when a new Ventoy version comes out, its documentation says updating leaves the files on that first partition unchanged.
Secure Boot
Many Windows 11 PCs have Secure Boot switched on. Microsoft's advice, if your USB drive doesn't show up as a boot option, is to check with the PC manufacturer about temporarily disabling Secure Boot.
Ventoy has supported Secure Boot by default since version 1.0.76. Its documentation says that the first time you boot Ventoy on each computer with Secure Boot enabled, you'll need to go through a one-time key enrolment, and that since Ventoy 1.1.13 you need to enrol a new key because of the UEFI CA 2023 change. Ventoy also says its default policy bypasses Secure Boot checks for the files it boots, which is worth knowing if security matters on that PC. If enrolment doesn't work on your machine, Ventoy's advice is to turn off its Secure Boot option and disable Secure Boot in the BIOS. Remember to turn Secure Boot back on afterwards; our guide to enabling Secure Boot and TPM shows where the setting is.
Booting from the USB drive
Plug the drive in and restart. Most PCs have a one-time boot menu key (often F8, F11 or F12; check your motherboard manual), or you can change the boot order in the BIOS. Microsoft also notes that if your PC doesn't boot from the USB drive automatically, you may need to open a boot menu or change the boot order in the BIOS or UEFI settings.
Our verdict
Use Microsoft's Media Creation Tool for a simple Windows 11 installer on an 8GB-plus USB drive, Rufus when you want to write a specific ISO with more control, and Ventoy when you want one drive that carries several ISOs you can pick from a boot menu. All three erase the drive during setup, so back it up first, and expect a one-time key enrolment if you boot Ventoy with Secure Boot on. Forge PC hasn't tested these tools on specific hardware for this guide.