Skip to content

NewsCPU

Noctua's NT-CP1 Carbon Nanotube Thermal Pad Is Out for AM5 and AM4: What Ryzen Builders Should Know

Noctua's NT-CP1 AM5/4 is a 90µm Carbice carbon nanotube thermal pad that it says improves over its first thermal cycles and never needs replacing. The suggested price is EUR 24.95 / USD 24.95. Early independent tests reported by The FPS Review put it a few degrees behind top pastes, with very little degradation.

By , Hardware News & Market Editor

3 min read

Noctua's NT-CP1 Carbon Nanotube Thermal Pad Is Out for AM5 and AM4: What Ryzen Builders Should Know

Noctua launched the NT-CP1 AM5/4 on 12 November 2026. It is a thermal pad, not a paste, built on Carbice's carbon nanotube technology, and it is cut to fit AMD Ryzen processors on the AM5 and AM4 sockets. Noctua's pitch is simple: apply it once and stop worrying about paste drying out or pumping out.

The specifications and claims below come from Noctua's announcement. The early independent results are as reported by The FPS Review, which summarised testing by LTT Labs and Igor'sLAB. We have not repeated either test.

What Noctua says the NT-CP1 does

  • Gets better before it settles. Noctua says pastes and most pads lose performance over time through pump-out, delamination and cracking. The Carbice pad, by contrast, is said to improve over its first few hundred to few thousand thermal cycles as the nanotubes conform to the surfaces, then hold stable "for years and years".

  • Easy to fit. Installation is "peel, press, peel". An aluminium backbone makes the pad sturdy and easy to remove, and a slightly tacky polymer coating holds it in place.

  • Electrically safe in normal use. Noctua says the coating keeps the contact surfaces electrically non-conductive before use, unless the polymer layer is penetrated. That is a contrast with some conductive graphite pads and with liquid metal.

  • Size: 90µm thick and pre-cut to 33 x 33mm, validated for Ryzen CPUs and APUs on AM5 and AM4.

  • Made from: recycled aluminium and waste carbon gas, in the US, and recyclable through standard aluminium recycling.

  • Price and availability: a suggested retail price of EUR 24.95 / USD 24.95, on sale from launch day through Noctua's official Amazon stores, with other retailers to follow. Noctua's announcement did not give a UK price.

There is no Intel version yet. Tom's Hardware notes that Noctua first announced the Carbice partnership in June 2026.

What early independent testing found

The FPS Review's launch report pulled together two sets of results:

  • LTT Labs tested a 90µm Carbice pad on a Ryzen 9 9950X3D with a Noctua NH-D15 G2 and an Arctic Liquid Freezer III 360. In short-term testing the pad ran 4 to 8°C warmer than Noctua's NT-H2 paste and PTM7950, narrowing to about 4°C after Carbice's suggested activation procedure. LTT also found that some pads lost 15 to 20% of their nanotube layer on first removal, and Carbice advises against reusing a pad.

  • Igor'sLAB tested an NT-CP1 press sample and measured roughly 4 W/mK effective conductivity, with only a 0.8 to 1.5% change after 10,000 severe thermal cycles. The catch, according to that report, is that a pad does not flow like paste, so it is more sensitive to mounting pressure and to warped surfaces.

Put simply, the early evidence points to excellent long-term stability but not the lowest day-one temperatures. Treat these as single tests reported second-hand, not as a ranking.

Should you switch from paste?

  • Choose the NT-CP1 if you build PCs for people who will never repaste them, or you hate the mess, and a few degrees matter less to you than "fit and forget".

  • Stick with a good paste if you want the lowest temperatures for the money, or you remove your cooler often. Each pad is effectively single-use. Our best thermal paste guide covers the pastes and phase-change pads worth buying, and our thermal paste replacement guide shows how to change it properly.

  • Check your mount. Because a pad cannot fill gaps the way paste can, even mounting pressure matters. Tighten the cooler evenly, as described in our CPU cooler guide.

Whichever you choose, check temperatures after the change with the tools in our HWiNFO and Afterburner monitoring guide.

Our verdict

The NT-CP1 is a credible, low-maintenance alternative to paste for AM5 and AM4 owners, and at a suggested EUR 24.95 it is not outrageous. Buy it for longevity and convenience, not for record temperatures: early tests reported by The FPS Review put it a few degrees behind top pastes in short tests, with very little degradation over time.

The bottom line

The NT-CP1 is a credible, low-maintenance alternative to paste for AM5 and AM4 owners, and at a suggested EUR 24.95 it is not outrageous. Buy it for longevity and convenience, not for record temperatures: early tests reported by The FPS Review put it a few degrees behind top pastes in short tests, with very little degradation over time.

Sources

  1. 01Noctua, Noctua introduces NT-CP1 Carbice carbon nanotube thermal pad for AM5 (12 November 2026)
  2. 02The FPS Review, Noctua's NT-CP1 Carbon Nanotube Thermal Pad Is Finally Here for AM5 and AM4 (12 November 2026)
  3. 03Tom's Hardware, Noctua brings space-grade carbon nanotube thermal pad to AMD AM5 and AM4 processors (12 November 2026)

About the author

Eleanor Shaw

Hardware News & Market Editor

Eleanor covers daily PC hardware news, silicon roadmaps, driver releases and UK retail pricing trends across AMD, Intel and Nvidia. She tracks board-partner specifications, industry standards bodies (PCI-SIG, JEDEC, VESA) and supply-chain shifts affecting British PC builders.

More from Eleanor Shaw

Read next

How to Run a Local LLM on an AMD Ryzen AI NPU With FastFlowLM

How-To

How to Run a Local LLM on an AMD Ryzen AI NPU With FastFlowLM

FastFlowLM runs language models on the XDNA 2 NPU in Ryzen AI chips. Update the NPU driver to 32.0.203.311 or later, install flm-setup.msi, test with flm run llama3.2:1b and use flm serve for an OpenAI-compatible local API.

Marcus Thorne3 min